[AIR23]

Thank you for fixed ERROR 3. But maybe you also have Error 2?

[jojo1212]

Use administrator run CMD.exe; for Ex: x:\etka\RosyVisionControl\registerControl .Net v4.0.bat
or use administrator run CMD.exe; for Ex: x:\etka\RosyVisionControl\registerControl.bat

Thanks

RegAsm : error RA0000 : You can not find the input assembly 'RoSyVision Com.dll' or one of its dependencies.


Edit:
Im download other "RossyVisionControl" folder and move to C:\ETKA and run "unregister" and run "register" and work OK!

thanks

this works

[adxinnixda]

THX, if installed ETKA @ D: worked as follow -

create folder ETKA on C:
put a kopy of the RosyVisionControl folder from D: in the new C:ETKA folder
now run the rossyreg.bat on your desktop.

OR better whit CMD:

C:\WINDOWS\system32>%SystemRoot%\Microsoft.NET\Framework\v4.0.30319\regasm.exe D:\ETKA\RosyVisionControl\RoSyVisionCom.dll /codebase

OR (where the Rosyvision is in ETKA/VWAU folder)

C:\WINDOWS\system32>%SystemRoot%\Microsoft.NET\Framework\v4.0.30319\regasm.exe D:\ETKA\VWAU\RosyVisionControl\RoSyVisionCom.dll /codebase



And he next problem I had, for Error by installing the updates: Returncode 2 – Error AA!

Copy the LexHdl5.dll from install folder ..\ETKA\VWAU\Prog1 to C:\Windows\System

[Audi_80]

Does this work for 64 bit systems?

regasm.exe in the standard Framework folder is Zero bytes.

regasm.exe in the Framework64 folder actually runs.

C:\Windows\Microsoft.NET\Framework64\v4.0.30319\regasm.exe C:\ETKA\RosyVisionControl\RoSyVisionCom.dll /codebase

Returns this error:

RegAsm: error RA0000 : Failed to load C:\ETKA\RosyVisionControl\RoSyVisionCom.dll because it is not a valid .NET assembly

SOLVED - Repaired the .NET installation and RegAsm became a proper exe again.

Thanks!

[mikeholroyd]

Downloading etka_error3_fix.rar did not work at all for me.

But this did work:

Open c:\ETKA\VWAU
Highlight the RosyVisionControl folder and press copy
Paste into c:\ETKA
LEAVE THE ORIGINAL ROSYVISIONCONTROL FOLDER IN C:\ETKA\VWAU
No more Error 3 messages now on opening ETKA

If I deleted the original in the VWAU folder it did not work, it seems to need the RosyVisionControl folder in both c:\ETKA and c:\ETKA\VWAU

Hope this helps