Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

EBV fault on X5 E53 3.0i RHD
19-02-2016, 11:27 AM,
Post: #1
XZBMW  EBV fault on X5 E53 3.0i RHD
My BMW is X5 E53 3.0 RHD (Australian version).
I got error code in INPA & Rheingold.
I can't get rid it off.
Anybody know how to rid of this trouble code?

[Image: 2_1.jpg]

[Image: 1_1.jpg]
Quote this message in a reply
19-02-2016, 18:52 PM,
Post: #2
RE: EBV fault on X5 E53 3.0i RHD
On newer X5 BMW Dealerships change "proportioning valve" that's mounted near the rear axle vary vary common to fail (about $1,xxx use ones never work either)
On older ones e46/e39/e53 i changed a module located under neat of driver floor mat or under neat driver seat (about $500, use ones never work either)
But in my Cases i seen it first show up in IKE and then after some time in ABS modules

You can also try a CHEAP fix
Code IKE
AN_EBV
from aktiv to nicht_aktiv

If any of my posts or current one helps then don't forget to press thanks and add a reputation thankyou
Reputation: +1 - jasonbaby [+1]
Visit this user's website
Quote this message in a reply
[+] 2 users say Thank You to CATAHA for this post
20-02-2016, 09:31 AM,
Post: #3
RE: EBV fault on X5 E53 3.0i RHD
Thanks for help? You meant the module located underneath driver seat that is it YAW sensor?
Did you say that AN_EBV or CAN_EBV?
Did you mean that:
Code KOMBI (IKE)
CAN_EBV from aktiv to nicht_aktiv
Quote this message in a reply
20-02-2016, 20:06 PM,
Post: #4
RE: EBV fault on X5 E53 3.0i RHD
(20-02-2016, 09:31 AM)jasonbaby Wrote:  Thanks for help? You meant the module located underneath driver seat that is it YAW sensor?
Did you say that AN_EBV or CAN_EBV?
Did you mean that:
Code KOMBI (IKE)
CAN_EBV from aktiv to nicht_aktiv
Yes, YAW sensor/module
Yes, CAN_EBV

If any of my posts or current one helps then don't forget to press thanks and add a reputation thankyou
Visit this user's website
Quote this message in a reply
21-02-2016, 11:20 AM,
Post: #5
RE: EBV fault on X5 E53 3.0i RHD
I am appreciated for your help. It worked for me.
I chose cheap fix. I recoded KOMBI with CAN_EBV: nicht_aktiv.
Now, faulty code is gone. However, I wonder that problem maybe cause by YAW or speed sensor. Cost for speed sensor's replacement is cheaper than YAW. So before replace YAW sensor, I need to make sure that speed sensors are in good condition.
I also still have a last faulty code in Ecu ZIS, it shows in INPA: No valid status response of TELEPHONE. It also in Rheingold in MID module by German language: Keine gueltige Statusrueckmeldung TELEFON.
I didn't use TELEPHONE (no equiped in my car).
Any suggesstion for me to get rid it?

[Image: IMG_0819.jpg]

[Image: 1_2.jpg]

[Image: IMG_0816.jpg]
Quote this message in a reply
21-02-2016, 14:25 PM,
Post: #6
RE: EBV fault on X5 E53 3.0i RHD
Check your ZCS if it contains any telephone option. Maybe previous owner removed it...
YAW sensor neither speed sensor triggers a EBV code. Usually it's caused by right rear wheel harness, check for nasty corrosion there. Quite common for E53.
Quote this message in a reply
[+] 2 users say Thank You to pimposh for this post
22-02-2016, 12:37 PM,
Post: #7
RE: EBV fault on X5 E53 3.0i RHD
(21-02-2016, 14:25 PM)pimposh Wrote:  Check your ZCS if it contains any telephone option. Maybe previous owner removed it...
YAW sensor neither speed sensor triggers a EBV code. Usually it's caused by right rear wheel harness, check for nasty corrosion there. Quite common for E53.

My ZCS is as below, I noticed on the line HANDY_TYP/ Siemens_s10. How to disable or remove telephone option? Do I need to delete the line "Siemens_s10" or delete the line "Siemens_s10" then type nicht_aktiv?

FERNWIRKEN_GENERELL
nicht_aktiv
FERNWIRKEN_NAVZIELE
nicht_aktiv
FERNWIRKEN_POSITION
nicht_aktiv
FERNWIRKEN_STANDHEIZUNG
nicht_aktiv
FERNWIRKEN_TELEFONLISTEN
nicht_aktiv
HANDY_TYP
siemens_s10
WAKEUP_GENERELL
nicht_aktiv
WAKEUP_TAGE
wert_01
WAKEUP_ZEIT
wert_01
FAHRZEUG_MMI
bmw
GAL_ANZAHL_STUFEN
wert_01
GAL_KMH_HYSTERESE
wert_01
GAL_KMH_STUFUNG
wert_01
NACHLAUF_ZEIT_H
wert_01
NACHLAUF_ZEIT_MIN
wert_01
ANZAHL_ANTENNEN
4
ANZAHL_RAEDER_UEBERWACHT
4
ANZAHL_RAEDER_VERBAUT
5
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW M3 F80 LCI Airbag fault Stefan1251 8 224 25-03-2024, 00:18 AM
Last Post: armenh7
XZBMW bmw fault code46d1 wassim 4 161 09-03-2024, 07:58 AM
Last Post: wassim
XZBMW Resetting a short circuit fault in a FRM module TIGHTFIN 10 1,139 24-02-2024, 22:29 PM
Last Post: vierchatura
XZBMW SOS error. B7F33C TCB: Internal Control Unit Fault TIGHTFIN 4 397 26-12-2023, 09:38 AM
Last Post: DEJMIEN
XZBMW WINKFP egs Fault rana 17 2,863 23-12-2023, 17:02 PM
Last Post: Nightrider_67
  HELP with fault 1F2108 in mevd17.2.5 elchecho83 4 435 22-11-2023, 12:09 PM
Last Post: elchecho83
XZBMW BMW MOTORRAD TFT blacked out istep K001-07-531 fault? NIGHT2000 16 846 18-11-2023, 08:46 AM
Last Post: NIGHT2000
  ISTA-P Error 1000 - A fault (1000) has occured ivanp 1 260 12-11-2023, 12:45 PM
Last Post: ivanp
  BMW 118D fault 36F600 Pedrom92 9 5,460 04-10-2023, 18:46 PM
Last Post: Lolo
XZBMW X5 F15 25d SCR 805256 fault bm92 7 925 04-08-2023, 09:55 AM
Last Post: bm92

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content