Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
DiagBox 8.01 Installation
28-10-2016, 19:51 PM,
Post: #51
|
|||
|
|||
RE: DiagBox 8.01 Installation
I had no problems going into the modules and I am on an old laptop running xp so that's why it could be slow so I'm happy with it
Cheers simple |
|||
28-10-2016, 20:01 PM,
Post: #52
|
|||
|
|||
RE: DiagBox 8.01 Installation
Check if you can do Telecoding (configuration), This is the latest update and it should have all the updates..
I know that DiagBox has not really been updated, but I have not noticed and drawback. So, I am keeping this version. |
|||
28-10-2016, 20:13 PM,
(This post was last modified: 28-10-2016, 20:32 PM by jpbroad1970.)
Post: #53
|
|||
|
|||
RE: DiagBox 8.01 Installation
I couldn't do telecoding
It could just be I don't know how to do it lol |
|||
28-10-2016, 21:13 PM,
Post: #54
|
|||
|
|||
RE: DiagBox 8.01 Installation
WORKS 100%
Good job Simple
Pass in pm after press thanks and rep buttons " alt="" title=""> |
|||
29-10-2016, 08:08 AM,
Post: #55
|
|||
|
|||
RE: DiagBox 8.01 Installation
How do I use televising? Is it a simple process?
|
|||
29-10-2016, 10:09 AM,
Post: #56
|
|||
|
|||
RE: DiagBox 8.01 Installation
(29-10-2016, 08:08 AM)jpbroad1970 Wrote: How do I use televising? Is it a simple process? This DiagBox term (Telecoding > Configuring/Programming) is used when installing or removing a module or when re-configuring an existing module. Example: https://www.youtube.com/watch?v=DCokjkIbsq0 |
|||
29-10-2016, 14:11 PM,
Post: #57
|
|||
|
|||
RE: DiagBox 8.01 Installation
Argh so it's done through lexia not diagbox
|
|||
01-11-2016, 19:37 PM,
Post: #58
|
|||
|
|||
RE: DiagBox 8.01 Installation
With 8.17 version i cant scan peugeot 306 2000 hdi , after select model, program open pp2000 and francais mesage about activation.... close diagbox, reopen it and get need activation
|
|||
01-11-2016, 19:59 PM,
Post: #59
|
|||
|
|||
RE: DiagBox 8.01 Installation
You either have not removed/commented the "version=8.17" from version.ini before operating Lexia or PP2000. Or did not run it as Administrator or both..
Please read the first post under Versions Try the above first, if Appdiag.sys is already corrupted, restore it from the copy you made after the successful installation and all should work fine. |
|||
12-11-2016, 22:14 PM,
Post: #60
|
|||
|
|||
RE: DiagBox 8.01 Installation
I have problem with diagbox screen i install diagbox v7.01 on clean install windows 7 32 bit update
all drivers but when i install diagbox v7.01 and open for first time show me small screen on the corner? how can i resolve this problem? |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
PSA Diagbox VCI Interfaces | alexturbo | 18 | 6,457 |
27-12-2023, 21:45 PM Last Post: apol |
|
DIAGBOX 2021 9.85 FULL INSTALATION | akli | 6 | 2,537 |
26-12-2023, 20:21 PM Last Post: Le-Mans |
|
DIAGBOX online | walczaklu | 10 | 8,544 |
03-12-2023, 12:57 PM Last Post: mattydr67 |
|
DiagBox 7+Updates+Firmware+Drivers+Tools (Magnet) | Simple | 33 | 35,302 |
22-11-2023, 06:16 AM Last Post: Jeppo |
|
Diagbox 9.129 activation request | dadoa4 | 4 | 2,349 |
09-11-2023, 09:59 AM Last Post: bovhec |
|
diagbox 9.150 | stasi | 5 | 2,045 |
16-09-2023, 19:41 PM Last Post: stasi |
|
DiagBox Language Change | Simple | 16 | 17,333 |
14-09-2023, 10:01 AM Last Post: żarówka |
|
Citroen C5 2008 electric handbrake calibration and installation procedure | roanoke | 1 | 345 |
07-08-2023, 08:23 AM Last Post: michalez |
|
DIAGBOX help needed installing | mars2moon | 4 | 997 |
23-07-2023, 18:45 PM Last Post: J415UNNY |
|
Diagbox 9.91 VmWare | gabi2008 | 6 | 4,178 |
23-07-2023, 18:42 PM Last Post: J415UNNY |
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content