[mgsgm]

First hi to every one here
I have problem in 2010 F07 GT before try to program EHC online programing and car after programing not cranking any more
so my friend change DME with used one and he took ZGM from F02 why he do that I don't know and program the whole car with Autel Maxsys.
I know that used DME will not start the car, yes now the car cranking but not start. I try to program the car with ISTA P with old DME and old ZGM but car now read as F02 and programing fail in DME boot loader Program.
I order virgin DME it will arrive after 2 week but my problem now how to return the car to F07 again so I will appreciate if some body help me in this situation.
I have original ICOM A2 and ISTA P 3.57.4.003 no thing else .

[vanos batam]

Hey mate
Did you try comonicate with FEM ?
And the Scantool still comonicate with DME ?

[IM6]

If you use Online programming you have also online support (help desk)

---

So you Programming F07 and after programming you cant start car
I do not understand you swap DME from F02 to F07 (
other software inside DME (ECU )) and one more programming ? (yes)
Now you have confuse car do not see property DME
Install Orginall DME and Program car one more time but Ista-P level higher
When im programming im use minimum Level Ista-P
I have same problem after programming i dont start Car was F04
i spend 3 h with my friend (BMW TECH) and we fix problem (programming do problems )

[mgsgm]

The ZGM that been replace with F02
but DME used one from F10
now I returned original controls DME & ZGM but the car still can't be program the DME again it fails on boot loader program using ISTA-P.
Second problem car now shown as F02

vanos batam
yes car can still communicate with DME

[mgsgm]

Here PIC when I try to reprogram orginal DME

[winter]

Here PIC when I try to reprogram orginal DME

VIN "C190049" is a 2010 MY F07.

[pimposh]

LOL It's always fun to read what people are doing

[IM6]

One time marriage with the car
It can not be changed to another ( F - series) (not all but most devices )
The same applies to (G- series) only new

[mgsgm]

LOL It's always fun to read what people are doing

hope you find what I am doing very funny

[pimposh]

Basing on what you have already wrote, it's clear that you don't know what are you doing.
Ask for remote (teamviewer) support, it would be much easier and faster for you to let someone help you that way....