[eliaselias]

Hello i want to ask if someone was abe to change mileage for jeep cherokee 2005+ by obd...
i have try many one from different model 2005 - 2007 - 2008- and i have try new model 2012... always digiprog give me a wrong mileage..
i remove cluslter and i do it with clip for model 2005 2006 2007... but from model 2008+ i can not read it on board so i desolder it....
i have try wrangler 2007-2008 by obd...it read and write ok ....
does any one have experience with jeep cherooke by obd ?

[pietje001]

In my data I have written someone did grand cherokee 2008 by obd ok. but i have nothing on cherokee.

even if someone else could do it, maybe you have other software in cluster.. if obd dont' work, you can't do anything about it. only option is to remove cluster and change manually.. Does that work? if not, upload dump file here.

[eliaselias]

Yes i can do it manualy ...its working ... but i want to see other if they success by obd with digiprog

[Dash_Burner]

I tried twice before 1 jeep compass and 1 wrangler by obd with success. In compass digiprog write wrong milleage ( ''CHECK WRITTEN VALUE 182108632987'') but in dash all ok.

[eliaselias]

In jeep wrangler i have no problem ... but in jeep cherokee digiprog read wrong mileage .... do you think if write a mileage it will be the same in dash ???

when you have read the jeep compass ... digiprog showed you good mileage ?

[DashPro]

Sometimes the digiprog does read different values on write specifically on the jeep compass
mine always did that also on the compass but writes the mileage properly so no worries
the only thing you need to be very careful with is the digiprog will not correct the sri side of the mileage on chryslers and dodge. Which means a redundent backup mileage is stored in SRI aka computer side of chrysler. most smelecom tools will also correct sri side and if you dont have the funds to start there i suggest picking up a tachopro2008 specifically just for doing the sri side of the mileage on chryslers so that everything is done complete and up and up

there cheap tools and i dont like them but for 160.00 you can do computer side which is worth its weight in dollars