[manpxman]

Please advice me on this one as having big problem with a vehicle that bought recently.When bought it I was told that it stood for ages not driven so it might smoke.After 30 miles it started to give huge amount of smoke and I mean huge as vintage train.Smoke looks a bit gray i would say as cigarette smoke.It's a PD passat 130 awx engine .just run a scan with delphi and attaching a results in pdf so please tell me can it be a failing injector(s) or worth trying just to get new seals as I am not sure regards what parameters needs to be.I manage to erase dtc faults apart the one with abs .Engine has got a bit vibration.Any advice appreciated

[Moller Diagnostik]

Please advice me on this one as having big problem with a vehicle that bought recently.When bought it I was told that it stood for ages not driven so it might smoke.After 30 miles it started to give huge amount of smoke and I mean huge as vintage train.Smoke looks a bit gray i would say as cigarette smoke.It's a PD passat 130 awx engine .just run a scan with delphi and attaching a results in pdf so please tell me can it be a failing injector(s) or worth trying just to get new seals as I am not sure regards what parameters needs to be.I manage to erase dtc faults apart the one with abs .Engine has got a bit vibration.Any advice appreciated

Hello

Seem that second silinder injector values is to much.
1.check turbo
2.interchange second injector with forth,check injector values
3.check silinder compression


good luck

[wajid]

Hi,

Injector value not is much, but what is engine condition its vibrates.

I hope Mass sensor and charge sensor wiring is fault. please check first continuity.