Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help with autocom/delphi software 2013.3
02-01-2014, 13:44 PM,
Post: #1
|
|||
|
|||
Help with autocom/delphi software 2013.3
Hello gentleman
I need your help is somebody have experience or similar problem, I have cdp+ clone from chine, everything working perfect just not when I want to make eobd (generic) scan looks like frozen .software is 2013.3 100251 serial . thanks in advance |
|||
02-01-2014, 16:44 PM,
Post: #2
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
Did you try to restart your pc?
It's possible that you will restart your pc for 3 times before it gets to work. |
|||
02-01-2014, 17:04 PM,
Post: #3
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
I try restart still same problem,i will try explain little clearly,when I do manual scan everything work OK,only problem when want to do generic scan EOBD software open first page and I can see VIN numbers and other parametars,when I chick on left side icon like check trouble code program continue searching and can not open,all menus working good(file,settings,documents,bookmarks)then I try stop(close ) program not possibility, need to stop with force cont-alt-del and stop.
I try on Hyundai accent 2012. Maybe is necessary special license for use generic scan. Thanks |
|||
02-01-2014, 17:05 PM,
(This post was last modified: 02-01-2014, 17:11 PM by prokon.)
Post: #4
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
It's demo on?
probably system now started Did you make test and actualization equipment? Is this Autocom or Delphi? |
|||
02-01-2014, 17:34 PM,
Post: #5
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
Demo was off when I test on car.
when is on demo system working normally,of course try with out car on demo mode all is actualized firmware updated,last software 2013.3 This is autocom cdp+ On booth software is same problem(autocom and Delphi) |
|||
02-01-2014, 17:47 PM,
(This post was last modified: 02-01-2014, 17:48 PM by prokon.)
Post: #6
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
You have probably on different CDP.
Like your cable at the different PC. Did he is damage maybe? I do not have the idea. Have you the friend cdp has? This new soft has several mistakes. |
|||
02-01-2014, 18:54 PM,
Post: #7
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
How I can know witch is correctly cdp,my looks gold with rubbers front/aft,slot for sd,flight record, card and 2 print plate inside
if is on different cdp I think I don't gona get any connection do you know maybe can I make in future update software on normal way software is activated by file and can I stay online on internet during using software. witch one you have and witch software you using,your is original or Chinese clone like my thanks |
|||
02-01-2014, 21:40 PM,
Post: #8
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
I bought these delphi from bluetooth and there is approx.
cotrolled at someone who has cdp. I greet |
|||
03-01-2014, 09:40 AM,
Post: #9
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
"...when is on demo system working normally,of course try with out car on demo mode
all is actualized firmware updated,last software 2013.3 This is autocom cdp+ How I can know witch is correctly cdp,my looks gold with rubbers front/aft,slot for sd,flight record, card and 2 print plate inside if is on different cdp I think I don't gona get any connection..." If your VCI is gold, is not CDP+ !!! Just read the small tag and you have VCI 100251; Rev.1.0? I'm afraid not. Is 30350, right? In this case, you need to reactivate your AC 2013.3 with right serial for right VCI. It is easy. If I helped you, please don't forget to press:
.......or this button:................. |
|||
03-01-2014, 15:03 PM,
Post: #10
|
|||
|
|||
RE: Help with autocom/delphi software 2013.3
(03-01-2014, 09:40 AM)pictorino Wrote: "...when is on demo system working normally,of course try with out car on demo mode This is my cdp,see in att I was opened inside have 2 electronic prindplate, One more picture,maybe you are right is not correct cdp,i want to be sure witch one i have,if is necessary i take picture prom inside |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content