[valentino88]

Hello i have today one Peugeot 307 -2006-1.6hdi the facelift model with bsi JC and dash eeprom i use DIGIPROG # 4.94-clone !!and make everything like manuel but when i need to put back everything just car is nost starting NFO AUTO VERROU ACTIF is msg wich come on and car can not start do you have any expirians with something like this i thing it is imo thanks for the help

[volavka]

Hello i have today one Peugeot 307 -2006-1.6hdi the facelift model with bsi JC and dash eeprom i use DIGIPROG # 4.94-clone !!and make everything like manuel but when i need to put back everything just car is nost starting NFO AUTO VERROU ACTIF is msg wich come on and car can not start do you have any expirians with something like this i thing it is imo thanks for the help

Read eeprom 95128 from BSI and Post here dump , we will see if bsi ok or not
Regards

[antenor]

Do you have a original dump of BSI?
If yes post here!

[valentino88]

Yes i have but there is one problem that it is in the digiprog i can not conect to ps i thing becouse is chine do you know what i can use to read S95128

[antenor]

You can read that with UPA or other programmer that supports this eeprom.
But now you can have corrupted data from eeprom.
You have the original data stored in digiprog?
In the latter case, copy the data manually to the notepad PC and sends it to be able to help you.

[fisekovic]

Dude did you try to jump start that car? As i remember it is common error when battery is too weak? Try to disconnect it for 45 min and than try to start it with some other good battery or jump start it with good cables....check fuses also and connections on bsi and dash....it is common electrical problem but i bet you drained battery while you worked on it....

[valentino88]

Thanks for answers just something mass with my eeprom digiprog make something and i take new bsi and now car is okey !! do you know what i can use to read bsi to see everything inside ?

[antenor]

You can use UPA!