Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Xhorse vvdi BGA MB tool Technical Support & Feedback
28-09-2017, 22:18 PM,
Post: #131
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
(28-09-2017, 21:26 PM)klisenko Wrote:  Calculate a new file in same position and test reset/programm

ive calculated , but same

got solved before , just wanted to share experience

talked to samic (xhorse technical support) in the Morning and told me this cuased cuz sometime when you read EIS about K line EIS one time,the data not stable
exactly key hashes not all correct,such as key5 hashes in fact in key6
one time read by IR maybe caused this problem
so when you read data by IR,better read several time
usually 2-3 times,then save
data should be stable
if you can find the IR EIS data,you can compare each key position hashes with eeprom
should some of them mistake
that's why both key not work


Cheers Peeps biggrin

BEST CHIPTUNING SERVICE BY Zenter Performance  [Image: congrats.gif]

Contact Skype: zenter-88 
Facebook: https://www.facebook.com/ZenterPerformance
--------------------------------------------------------------------------------------------------------------

highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/
POWER BY TECHNOLOGY drive

--------------------------------------------------------------------------------------------------------------
BEST CHIPTUNING SERVICE BY Jurebv   [Image: yes.gif]
Contact Skype: live:jure.coric_1
https://files.tuning-makarska.com/
--------------------------------------------------------------------------------------------------------------
-
IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE   
In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software 

WHAT'S NEWS !
-Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG 
-Citroen DS5 Steering lock Renew/Write Code by dumps
-Passat CCM Repair corrupted dump succes
-VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED !
-IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X
-Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS


-=[Full WinOLS/ECM Titanium User] =-

Remember!  dirty hands  are a sign of clean money 

шшш.αήkαbôôτ.Ćô.цk
Visit this user's website
Quote this message in a reply
[+] 3 users say Thank You to volavka for this post
29-09-2017, 01:46 AM,
Post: #132
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
Hi I would like to replace elv on 09 c300 with xhorse emulator, what is the correct precdure?
should I always renew EIS first then adept emulator or read eis via obd ,save data, go to esl tool
load eis saved data then write to emulator ?
can some body help for correct procedure , im having problem with getting eis erass password online . and support guy from the company busy for few days. I think only one guy run the whole show.
Quote this message in a reply
01-10-2017, 08:28 AM, (This post was last modified: 01-10-2017, 08:29 AM by klisenko.)
Post: #133
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
Steps get hash data -get pasw key on board if 51 57 get erase pasw save go esl menu open eis data tick auto clear tp and personalization

Sent from my GT-I9301I using Tapatalk

And write

Sent from my GT-I9301I using Tapatalk
Quote this message in a reply
[+] 2 users say Thank You to klisenko for this post
17-10-2017, 16:14 PM,
Post: #134
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
Hey guys
I have a w221 s-class 2009
It's probably NEC chip
I can't read the password with my Avdi and vvdimb
And I'm sick of changing eis all the time because it's not profitable to my cust 700-900$
While he can get a key made from the dealer for around 300$
Any 1 have found a solution for that eis yet ?!
Please share thx!
Quote this message in a reply
18-10-2017, 15:14 PM,
Post: #135
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
2007 and 2008 164 and 221 passwords could not be extracted by any tool. 2009-2011 should be readable with Diagspeed and maybe VVDI MB.
Quote this message in a reply
[+] 2 users say Thank You to bawareca for this post
22-11-2017, 02:00 AM,
Post: #136
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
************************************************************************
*** 2017-11-21
*** Require firmware V3.5.0
************************************************************************
===== BENZ V3.5.0 =====
1. Attention: All user update device to firmware v3.5.0, software v3.5.0
2. Improve the success rate of erase password, the server will continue improve the database
3. New function: Menu->Other Function->Eeprom dump tool, support repair W210/W220 ISN eeprom dump
4. New function: Menu->Other Function->Read/Write EERPOM via OBDII, support read CPU eeprom from W202,W208,W210 EIS directly with KLine
5. New function: Menu->Other Function->Customer request, support communicate unit with CAN command(Professional user use)
6. Support detect EIS CPU chip from OBDII, after read EIS data via OBDII, you can get CPU chip is motorola or NEC
7. Support renew W639, W906(NEC) ESL via KLine
8. Bugfix for OBD communication with W639, W906 on the bench
9. Bugfix for erase problem in W204 ESL
10. Bugfix for IR read key hash on the motorola EIS
11. Support W209, W211 read password(from IR) under OBD mode
12. Add W251 EIS type
13. In Prepare Key File window, support save the key file in EIS folder automatically
14. Support Polish language
15. Bugfix
Any problem please contact with me


Attached Files
VVDI MB TOOL 3.5.0 download link.txt
File Type: .txt
Downloaded: 7 times
Size: 87 bytes

Quote this message in a reply
[+] 7 users say Thank You to Xhorsesupport for this post
23-12-2017, 06:49 AM,
Post: #137
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
************************************************************************
*** 2017-12-23
*** Require firmware V3.6.0
************************************************************************
===== BENZ V3.6.0 =====
1. Attention: All user update device to firmware v3.6.0, software v3.6.0, the lower version don't support password calculation
2. Add Upgrade Kit, use upgrade kit to update the firmware. Menu->Update Online->Upgrade Kit
3. Improve the success rate of BAG key password, erase password and enable key password
1) The server have 99% success rate for key password now (You can get key password for only 1 time calculation)
2) Reduce the key password calculate time, we only need about 20 seconds for 1 time calculation
3) The server have 99% success rate for erase password and enable key password now
4) Add some old version NEC key for password calculation
5) We will continue update our server to achieve good result for BAG key password, erase password and enable key password
4. Support activate EIS from OBDII. Menu->Other Function->Customer request->Activate EIS
5. Support activate W906(NEC) ELV from OBDII
6. Bugfix


Attached Files
VVDI MB Tool Ver3.6.0 software download link.txt
File Type: .txt
Downloaded: 9 times
Size: 108 bytes

Quote this message in a reply
[+] 8 users say Thank You to Xhorsesupport for this post
01-02-2018, 13:09 PM,
Post: #138
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
Can this tool add key to clk and slk 2004 year with obd or it, and under what menu are these cars?
Quote this message in a reply
05-02-2018, 09:56 AM,
Post: #139
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
(01-02-2018, 13:09 PM)nikolanik Wrote:  Can this tool add key to clk and slk 2004 year with obd or it, and under what menu are these cars?
04 year clk and slk,read by the programmer,then load it into prepare key file to do the key
Quote this message in a reply
[+] 2 users say Thank You to Xhorsesupport for this post
14-05-2018, 19:58 PM, (This post was last modified: 14-05-2018, 20:05 PM by dasdiagnosis.)
Post: #140
RE: Xhorse vvdi BGA MB tool Technical Support & Feedback
hi members today I am facing this problem
they gave me an elv+ezs and mechanical engineering [mercedes]he told me he changed motors {china}and the locks worked once and for all stoped
I wrote a used one and worked normally tells me to put the new motor
so I put the new motor [china] worked once and for all stoped
ιits possible the motor damaged the locks ?


my English is not good sory

(14-05-2018, 19:58 PM)dasdiagnosis Wrote:  hi members today I am facing this problem
they gave me an elv+ezs and mechanical engineering [mercedes]he told me he changed motors {china}and the locks worked once and for all stoped
I wrote a used one and worked normally tells me to put the new motor
so I put the new motor [china] worked once and for all stoped
ιits possible the motor damaged the locks ?


my English is not good sory
the vvdi when I read the elv wrong position
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  CGDI BMW Keytool Feedback ROD-BENDERS 71 28,400 24-03-2024, 21:11 PM
Last Post: Cerhio
0Immo NEW EASY IMMO DOCTOR 2.1 Multi Immo Tool.+ KG ROD-BENDERS 44 10,060 17-03-2024, 14:52 PM
Last Post: kar407
  cas3 9389115 downgrade fail - vvdi keytoolplus motorsoft 2 115 14-03-2024, 10:08 AM
Last Post: sixcode
  OPEL grandland Med17.4.4 need pinout and recomand tool to read fadyeid 0 45 11-03-2024, 16:12 PM
Last Post: fadyeid
  Key Programming Tool koziol 1 124 06-03-2024, 07:22 AM
Last Post: TKservice
0Immo Car-Edit tool - dash ecu bsm srs immo ROD-BENDERS 31 8,379 05-03-2024, 21:01 PM
Last Post: keyzex
  VAG IMMO OFF TOOL for free josef1708 6 1,820 03-03-2024, 09:42 AM
Last Post: josef1708
  Solved ✔ Need help with Xhorse XEB510EN B5 Remote nadelhubgeber 5 154 24-02-2024, 15:03 PM
Last Post: nadelhubgeber
TMisubshi Need support for MH141557 immo ecu virgin file ste821 0 50 20-02-2024, 20:38 PM
Last Post: ste821
KOpel Upa Script to read Opel Immo Pin 29F400 or tool meszol 0 94 08-02-2024, 12:09 PM
Last Post: meszol

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content