Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi MMI - MAP Activation SD Card 2013
07-01-2014, 04:06 AM,
(This post was last modified: 07-01-2014, 04:10 AM by benyclaudiu.)
Post: #1
|
|||
|
|||
Audi MMI - MAP Activation SD Card 2013
Activaction Map, 2013
With this activation have enabled my car Audi A6 4F MMI 3G HDD in 2009. Please check if you can activate multiple machines this activation do not forget to press the thanks button if this helped activation Procedure is the following: UPDATE 2013 AUDI MMI 3G HDD These updates apply MMI 3G HDD and Joystick HIGH ! If you have aftermarket interface (AMI , Dension ) disconnect them before update. Because there have been cases of inattention , I repeat the warning : ! DO NOT ever click Start Bootloader ! IMPORTANT ! The update must be done with the engine running and no power consumption , otherwise there is a risk of battery power quickly , so headlights closed if night without power windows or sunroof open without heated seats etc. . Moreover , such a warning consumers not to be current will simultaneously appear on the display when starting installation. There is still a danger if positions remain on, or light board . January . Detailed update procedure ( it will make all the CD1 , CD2 , CD3 ) - Start the engine , turn off the ignition other consumers and not during data update - Put the Update CD into the CD / DVD + 2xSD - Press all keys and then CAR SETUP - Then hold SETUP and press RETURN. Keep it pressed for 5-7 seconds and update menu will appear ( SOFTWARE UPDATE ) - Press the UPDATE button ( lower right corner ) . - Select CD / DVD as the source in Download Server - There will be a version of the software , press the center button - Select Standard - You will see a list of updates available on CD and at the end of the list by clicking the "Start Download" . Confirm and then again "Start" - Gives a system restart and then start to update - According to the options available on the car that will be updated , say 5 , the end of the installation it will show something like : 5 OK , 0 NOK (not OK ) 0 N / A ( not applicable ) . If any options appear that NOK will check the "Try again" . - To finally appear "Device description" - the list of modules and their status updated OK. - Press "Continue" - Press " Abort documentation" - The unit will restart . |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content