Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



Can not read EDC17C46 with Ktag
26-04-2016, 13:03 PM,
Post: #1
Can not read EDC17C46 with Ktag
Hi
I tried read ecu from vw sharan edc17c46 with fgtech and not succesfully, after I tried ktag and also can not read... pleas look on my pictures connection that is correct.. thank you


Attached Files Thumbnail(s)
       
Quote this message in a reply
26-04-2016, 14:20 PM,
Post: #2
RE: Can not read EDC17C46 with Ktag
Protocol edc17c46
Quote this message in a reply
[+] 1 user says Thank You to deeldragan for this post
26-04-2016, 14:50 PM,
Post: #3
RE: Can not read EDC17C46 with Ktag
If you have a clone FGtech Galleto not read the ECU

New Trasdata
Pin 68 - CAN H white cable
Pin 67 - CAN L green
Pin 2 -GND black
Pin 6 and 87 -12 V red
POL 4 Boot grey
POL5 CNF1 blue

Or BDM connection
Quote this message in a reply
[+] 1 user says Thank You to IM6 for this post
26-04-2016, 15:04 PM,
Post: #4
RE: Can not read EDC17C46 with Ktag
Use protocol 199!
Quote this message in a reply
[+] 2 users say Thank You to parik for this post
26-04-2016, 15:39 PM,
Post: #5
RE: Can not read EDC17C46 with Ktag
Ths I think that connection is gook, I test ecu in car and it is OK. Ktag is maybe bad, I connect voltmetr to gnd and power wires and DC pulse up tu 12V and down to 0 V ..
Quote this message in a reply
26-04-2016, 15:53 PM,
Post: #6
RE: Can not read EDC17C46 with Ktag
Are you sure the wiring is ok in the adapter?
some need reworking also is ktag reworked?

if my post helps please give Reputation under and Thanks under
Quote this message in a reply
[+] 1 user says Thank You to domelec for this post
26-04-2016, 16:04 PM,
Post: #7
RE: Can not read EDC17C46 with Ktag
For this tipe of ecu you need a better power source.
I had the same problem with PCR2.1.
Take a 12v 2 amps psu, and then the voltage will stay.
Quote this message in a reply
[+] 3 users say Thank You to dorofteius for this post
26-04-2016, 17:54 PM,
Post: #8
RE: Can not read EDC17C46 with Ktag
(26-04-2016, 15:53 PM)tango Wrote:  Are you sure the wiring is ok in the adapter?
some need reworking also is ktag reworked?

Can you tell me some info about reworking pleas?
Quote this message in a reply
26-04-2016, 18:00 PM,
Post: #9
RE: Can not read EDC17C46 with Ktag
You need to change all capacitors, some transistors ( allot), and the murata filters.
Post a picture High resolution, and we will tell you what you need to change.
Quote this message in a reply
[+] 3 users say Thank You to dorofteius for this post
26-04-2016, 18:25 PM,
Post: #10
RE: Can not read EDC17C46 with Ktag
Select P199 in ktag menu, there is bug for edc17c46 in ksuite
Quote this message in a reply
[+] 2 users say Thank You to parik for this post


Possibly Related Threads...
Thread Author Replies Views Last Post
  Another free give away winols no read remover Remap Ross 222 13,766 Today, 00:35 AM
Last Post: TAZBORN
  Ktag to Nissan Mec31 malguy 0 32 20-03-2019, 03:41 AM
Last Post: malguy
  read with Ktag Tomate 0 63 18-03-2019, 13:59 PM
Last Post: Tomate
HJaguar Jaguar X-Type Read Orange_99 6 153 17-03-2019, 20:39 PM
Last Post: Orange_99
XZBMW MSV70 KTAG Silva1337 8 275 15-03-2019, 06:40 AM
Last Post: willisodhiambo
Lamborghini Read Lamborghini third ECU(GFA) ? salaausi 0 66 14-03-2019, 03:14 AM
Last Post: salaausi
ZSkoda skoda yetti (edc17c46) EGR+FAP ofF plz !!!! magicphone1 2 153 13-03-2019, 14:53 PM
Last Post: magicphone1
  KTag 7.020 tkasak 0 146 11-03-2019, 18:23 PM
Last Post: tkasak
ZVW GOLF 5 BMY 03C906 032 E MED 17.5.1 read write johmn1978 4 126 09-03-2019, 08:56 AM
Last Post: johmn1978
JAlfa Magnet Marelli 9DF ECU Read kasnel25 2 101 07-03-2019, 18:46 PM
Last Post: alex68

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content