Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
HONDA ODYSSEY ECU FUSE NO POWER
30-04-2016, 11:09 AM,
Post: #1
|
|||
|
|||
HONDA ODYSSEY ECU FUSE NO POWER
I have this honda odyssey 2000 that is giving me problem. I tried programming a lost key using x431 and I got the message immobilizer unit failure. however, I noticed the car is not even starting and dying for some seconds just like it could with an unauthorized key. I also noticed that there is no power to ecu fuse #13. any help?
|
|||
30-04-2016, 11:18 AM,
Post: #2
|
|||
|
|||
RE: HONDA ODYSSEY ECU FUSE NO POWER
There won't be any power to fuse #13 if there is immo problem, the starter cut relay will be off and cut power to this fuse.
If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
30-04-2016, 13:20 PM,
Post: #3
|
|||
|
|||
RE: HONDA ODYSSEY ECU FUSE NO POWER
|
|||
30-04-2016, 14:38 PM,
Post: #4
|
|||
|
|||
RE: HONDA ODYSSEY ECU FUSE NO POWER
Yes it is linked , purpose of immo is cutting power so engine cant start, you have a bad immo or non programed key to that immo
|
|||
14-09-2017, 08:51 AM,
Post: #5
|
|||
|
|||
RE: HONDA ODYSSEY ECU FUSE NO POWER
I have fixed this kind of problem before, it was bad immo that is the culprit. atimes the transponder[coil ring on the key ignition mouth too could be bad] lastly replace the chip or get other key to reprogram.
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content