[IM6]

Please help
I needs to do IMMO OFF
I have used computer ECU 03l 906 019 DB Diesel EDC17CP14
I read it FGTECH Galleto (China )

[cport]

Post here file , or write me in PM

[IM6]

NEW (used ECU)
OK this i EEPROM
EXTERNAL FLASH
INTERNAL FLASH
AND
ALL in ONE

[izouf]

Hi here is your flash off write
good luck

[ktyy]

FREE FOR ALL

1) Change the following values in eeprom - it works in all the cars.

8A FA XOR 3 = F9
10A FA XOR 3 = F9
18A FA XOR 3 = F9

etc....

and then calculate checksum !!!



2) The solution for EDC17 VAG works only with flash in processor and there appears key error on the dashboard.

Find: 8C F0 0F F4 80 20 8B 02 20 22 00 90

then change '8B 02 20 22' to '00 00 82 12'

This is immo off : 8C F0 0F F4 80 20 00 00 82 12 00 90

and then calculate checksum !!!

kty

[ROD-BENDERS]

Thanks for the answer
OK this i EEPROM
EXTERNAL FLASH
INTERNAL FLASH
AND
ALL in ONE

Here immo off in eprom all checksums made

[IM6]

Orginal OLD ECU

Read DimSPORT New Transdata
and
KTM_100 (china)

I like clon this ECU to the NEW (Used) ECU

How to do this ?

[ROD-BENDERS]

Orginal OLD ECU

Read DimSPORT New Transdata
and
KTM_100 (china)

I like clon this ECU to the NEW (Used) ECU

How to do this ?

We need Old ecu eeprom and New ecu eeprom to make a clone.

All the files will need to have been read with the same type of tool. The files will need to be clearly marked in two folders named "old" and "new" to prevent confusion.

can you provide this ?

The dimsport read is unuseable.

we have marek eprom file, and marek microcontroler file is maybe useable, going manually through it i can see that it contains Tprot v07 but this file is either not a good read, or someone has had their sticky fingers inside.

[IM6]

Ok
THIS IS
New (use ECU) i i read NewTransdata DIMSPORT KTM-100

---

I Have file only from Transdata KTM-100 (old Orginal) and (new USE ONE) ECU
files orginalne not touched

from FGtech i have only (new USE ONE)

[ROD-BENDERS]

Ok
THIS IS
New (use ECU) i i read NewTransdata DIMSPORT KTM-100

---

I Have file only from Transdata KTM-100 (old Orginal) and (new USE ONE) ECU
files orginalne not touched

from FGtech i have only (new USE ONE)

Ok this last eeprom is better quality than the one before it, but the mpc has some strings missing aswell.

These Immo off files are the best I can do for you in the circumstances IM6.

same password as before

Yes IM6 all checksums are made.