Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help reading 4j74y
11-05-2016, 14:59 PM,
Post: #1
|
|||
|
|||
Help reading 4j74y
Hi guys, i have some troubles reading 4j74y motorolla MCU. tried with ak500 but no lucky, tried with upa not working again. i have xprog 5.55 but i dont have the pinout. i want to make new key but the car is far from here and im afraid that trying to read i have corrupted mcu. i have desoldered and tried to read
|
|||
11-05-2016, 15:07 PM,
Post: #2
|
|||
|
|||
RE: Help reading 4j74y
You need security bytes to read this mcu ..
eith etl not need security bytes because auto pass it tell us from whats you want read the mcu ? BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
Reputation: +1 - italianec [+1] | |||
11-05-2016, 17:49 PM,
Post: #3
|
|||
|
|||
RE: Help reading 4j74y
Its from w203 ezs, i want to program a new key . tried with etl but still not capable to read. i put the mcu in ezs and it turns on bench with working key so maybe mcu is not corrupted
|
|||
11-05-2016, 18:54 PM,
Post: #4
|
|||
|
|||
RE: Help reading 4j74y
use R270 to read it...i have very good experience...mainly in reading EZS this or other masks
»» Always use ---> and ---> if my post was helpful... ««
|
|||
12-05-2016, 10:35 AM,
Post: #5
|
|||
|
|||
RE: Help reading 4j74y
You can also use ak500
|
|||
13-05-2016, 12:18 PM,
Post: #6
|
|||
|
|||
RE: Help reading 4j74y
Thanks to all, problem solved with etl
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content