[edz]

Hi,
i tried to flash motor ECU with Odis-E. I used VW36X project, but it didn´work.
Any suggestion witch project i should use ?

Thanks
edz

[eltiobarbas]

You are using the right project the problem its other.

</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="A">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="B">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="C">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="D">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="E">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7N" VIN-MODEL-YEAR="F">
<DIAGPROJECT>VW36X</DIAGPROJECT>
</EXPECTEDIDENTS>

[flashgorden82]

Hello,

1. make diagnistic with "ODIS Service" an save the Protokol when you finish
the session.

2. open the log and search: "ASAM-Projekt-Name" (see Screenshot)

   

3. use this Project (ODX) in ODIS Engineering

Sharan 7M = VW41x

please for feedback if that works well, and what project for Sharan 7N.
(For my documentation!)

[eltiobarbas]

I thought you are using UDS in my other post ,because you say 7N...But you are actually have 7M ...This is the right project

You need to use ,VW41x_7M_6

<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7M" VIN-MODEL-YEAR="6">
<DIAGPROJECT>VW41x_7M_6</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7M" VIN-MODEL-YEAR="7">
<DIAGPROJECT>VW41x_7M_6</DIAGPROJECT>
</EXPECTEDIDENTS>
<EXPECTEDIDENTS VIN-VEHICLE-TYPE="7M" VIN-MODEL-YEAR="8">
<DIAGPROJECT>VW41x_7M_6</DIAGPROJECT>
</EXPECTEDIDENTS>