[Vojno]

Hi mates'

Somebody haw source for the INPA  *.ipo file for Motorbike?   

For an K24 series I hawe it, but for the new series don't. 

I would be willing to give some donate as well.

Thanks

[14TLC]

I'm not sure that INPA can handle later models than those from K24 and thus no ipo file available. This is my thinking anyway, I have not used INPA on motorcycles when ISTA is available.
What do you have in mind?

[Vojno]

I think it should be, I'd be happy for him.

With ISTA i can't activate some function, like the switch witch is competently broken for the radio on the left side then can,t switch on the radio, or off.
So in ISTA don't have this page in ECU, or only gray.

My other problem, that i can't use in tool32 this function, because i can't find the right solution for this, i mean the syntactic for this attribute (ex. radio switch on or off)

[14TLC]

Aha, I understand. So you basically want to check whether the radio is operational without using the switch. On which module is this switch connected? Maybe you can check from there. I suppose is LIN bus switch.

I don't want to mislead you, it is been a while since I was messing with INPA and Tool32, did not had time to learn them well. But if I remember correctly there was I way to compile ipo file from a prg and ips files.

[Vojno]

It was just an example, but then I noticed that this feature does not exist in ISTA.

If I was to use correctly the Tool32 then I could build my IPO file in step two.

[____ANGEL___]

use group file d_radio.grp or mraudio.prg this on k24, if you want other models feel free to ask.

[Vojno]

How to check this without bike? I mean the tool32 cannot check this without the ECU!

I wan to check with X_audio.prg

[____ANGEL___]

Yes it can! Activate flag simulation, you find it in tool32 configuration menu, select ediabas

[Vojno]

and?  what else should I put in?

   

[____ANGEL___]

theoretically ARG;RADIO_EIN_AUS_SCHALTEN_MR;STA;1

never tried...