Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Problem Ista with K+Dcan
16-12-2017, 14:39 PM,
Post: #1
Problem Ista with K+Dcan
Hi there,
maybe it's the wrong subforum but i'm posting it here.

I have K+Dcan cable and it works like a charm with my r1200s and obd to 10 pin adapter from china.
I even programmed it to Ilevel 2015.

But after reinstallation of win it recognises my bike just sometimes. i have to connect via tool32 a several times to find my bike. then the connection is stable for at least a few minutes. if i have luck it's stable as long as i identify it via ista d. in ista p there's no chance to connect to the bike.
with cars i don't have that problem (always stable).
tried to downgrade ftdi driver but the problem this occurs.
i have two obd-10pin cable, but problem is with both.

does anyone have an idea how to solve it ?

thx
Quote this message in a reply
16-12-2017, 14:51 PM,
Post: #2
RE: Problem Ista with K+Dcan
Hello, set the cable in Device manager to Latency1 instead of Latency16
Quote this message in a reply
16-12-2017, 21:22 PM,
Post: #3
RE: Problem Ista with K+Dcan
Hi,
checked multiple times that is set to 1 ms sad
Quote this message in a reply
16-12-2017, 21:31 PM,
Post: #4
RE: Problem Ista with K+Dcan
Try to change port number
Quote this message in a reply
16-12-2017, 21:55 PM,
Post: #5
RE: Problem Ista with K+Dcan
Hello, then use the KDCAN utility in the first minute that the cable is connected to usb and OBD in order to set the cable to the correct speed:
[Image: a650d639996d69c2ab7ff9b928b5ab09.jpg]

see which speed is needed for your bike, usually for cars built starting with march 2007 it's needed to have it set to 500Kbits.

good luck!
Quote this message in a reply
17-12-2017, 13:35 PM, (This post was last modified: 17-12-2017, 13:36 PM by heinid.)
Post: #6
RE: Problem Ista with K+Dcan
Thanks for the hint, but i tried k+dcan utility already with no sucess sad
bike is from 3/06
Quote this message in a reply
17-12-2017, 16:11 PM,
Post: #7
RE: Problem Ista with K+Dcan
In that case you don't need the kdcan utility, just the cable requires pins 7&8 bridged together.
you should try on a different pc or a car to see how it goes.

cheers!
Reputation: +1 - ROD-BENDERS [+1]
Quote this message in a reply
[+] 2 users say Thank You to egyclick for this post
25-12-2017, 09:41 AM,
Post: #8
RE: Problem Ista with K+Dcan
Unfortunatly no success with pin 7/8 bridge adapter...
Quote this message in a reply
21-01-2018, 18:19 PM, (This post was last modified: 21-01-2018, 18:21 PM by Bimmer540.)
Post: #9
RE: Problem Ista with K+Dcan
Does Ista-p works on BMW K1600 GTL Exclu 2014 with K+Dcan cable and obd to 10 pin adapter from china for programming.
Quote this message in a reply
16-02-2018, 05:11 AM,
Post: #10
RE: Problem Ista with K+Dcan
Update:
no problems with istad k+dcan and win7
problem mentioned before was with win10
thx anyway thumbsup[/i]
Quote this message in a reply


Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content