Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Xhorse vvdi2 tool Technical Support & Feedback
25-01-2018, 00:18 AM,
(This post was last modified: 25-01-2018, 00:34 AM by Silva1337.)
Post: #111
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello the past time im thinking about buying so im aiming about that VVDI Programmer + VVDI Basic function + BMW Obd so i have few questions..
Probably for programmer i dont have any question im buying because time to time need to read/write cas dump, about that second set what i will get? Key maker by obd , which cas? 1-4+?if no i need read dump by vvdi prog or then i need buy cas plug separatly? Does it changes mileage in all cas by obd? As i understand its precessor of bmw multi tools, does it reads isn by obd? if i have chance to make cas with updated software can be it solved with bmw tools downgrading the software of cas? May i missed something? looking for feedback hard to find something on forums btw is that official shop or reseller? link here |
|||
25-01-2018, 06:19 AM,
(This post was last modified: 25-01-2018, 07:16 AM by raffy haddad.)
Post: #112
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello
for bmw obd diag and key maker it is good but always you need from time to time to make it on table because not all cas can be done by obd about downgrade fw some cas 3 + work and some not work by obd about isn by obd it is included but personaly not tried it yet For cas4 can’t be made by obd regards Always new stuff to learn
Skype: raffy.haddad File services : multi brand ecu immo off , VW solutions : immo transfer immo off , pcr 2.1 immo , BMW EDC16 IMMO OFF , .... Yamaha smart key supply pin code from dump ( TMAX , XMAX ) Chevrolet simens sirus D3x D4x D5x delphi MR 140 IMMOOFF I DO MY BEST HERE TO HELP YOU MAKE SOME $$$ BUT ON PRIVATE IS DIFFERENT Members who not report back they're name will be black listed on my list |
|||
25-01-2018, 07:31 AM,
(This post was last modified: 25-01-2018, 07:34 AM by Silva1337.)
Post: #113
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
But you mean on table i need dismount cas from car and use cas plug which they sell separatly correct?or read dump of cas eith programmer then make key by dump?
|
|||
25-01-2018, 09:06 AM,
Post: #114
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
(25-01-2018, 07:31 AM)Silva1337 Wrote: But you mean on table i need dismount cas from car and use cas plug which they sell separatly correct?or read dump of cas eith programmer then make key by dump?Yes you will have to remove the cas if it can’t be done by obd, As far as I understand cas 1 and 2 can be read with the cable /plugs supplied, cas3 and onwards you will need to use vvdi prog to read it. |
|||
25-01-2018, 11:01 AM,
Post: #115
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Btw vvdi 2 prog eats 35160WT ? I didnt found in software , but heard after update it eats now really?
|
|||
26-01-2018, 06:14 AM,
Post: #116
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Have no this option all the time,you must have remembered incorrectly.
|
|||
28-01-2018, 12:20 PM,
Post: #117
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hello, i used vvdi2 to make keys on f30, f20 with fem, reset fem km, virginize fem...works very well
If this post helped you don't forget to press rep and thanks buttons
|
|||
31-01-2018, 13:17 PM,
Post: #118
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
Hi
i have problem f30 434mhz fem eeprom 95128 is broke need eeprom dump this moment car starting but remonte conrtrol dont work what the best solution? |
|||
31-01-2018, 13:25 PM,
Post: #119
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
(31-01-2018, 13:17 PM)rola1971 Wrote: Hi Are you from ireland? Setubal-Portugal
|
|||
31-01-2018, 13:28 PM,
Post: #120
|
|||
|
|||
RE: Xhorse vvdi2 tool Technical Support & Feedback
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Return to TopReturn to Content