Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved ✔ CAL 830 error-Solution needed!
11-07-2016, 06:56 AM,
Post: #1
|
|||
|
|||
CAL 830 error-Solution needed!
Hello,
right here in this forum I am a newbie but I have still made some experience in the xp based XENTRY & wis-standalone. Starting 2010. After having installed in 2016 EPC & WIS on my WIN10 32Bit Notebook (PL70.txt is missing!) I tried to install OpenShell. I have been able to setup xentry (19.11.3.1) patching the Start KeyCenter, use my old keygen etc., DAS 7/2016. My first problem has been the 2111-45 error. The patch from Glint does not help (No xentry on your system found!) but I get around this. Now everything seems to work- xentry is closing the connection to my car in SDConnect- up to the moment when the cal830 error arrives in DAS. I am using a cabled C4 Mux- maybe it is an C3 in an other housing?? Maybe someone has a hint for me? Or is the C3 a nogo in openshell? But why has Glint the C3 switch in his patcher? I have tried this but no impact! Thanks in forward for any help! Keep working in this wonderful forum. Martin |
|||
13-07-2016, 09:09 AM,
Post: #2
|
|||
|
|||
RE: CAL 830 error-Solution needed!
Hello,
I can´t believe that no one had have the same problem! there are too much C3Mux in the field. I ve worked yesterday a little bit. After some small modifications in the toolkit.ini I am now able to reach the C3 mux even start the selftest in SDConnect. But I still always get the Cal830 error in DAS although I ve found the Caesar protokol in the DAS files. I am quite sure that someone had made some R&D with this problem.So a little hint will help me. Best regards grabbelmanko |
|||
09-08-2016, 00:12 AM,
Post: #3
|
|||
|
|||
RE: CAL 830 error-Solution needed!
(13-07-2016, 09:09 AM)grabbelmanko Wrote: Hello, Watch version XENTRY you use ? |
|||
15-08-2016, 08:55 AM,
Post: #4
|
|||
|
|||
RE: CAL 830 error-Solution needed!
Hello,
after some deep R&D everything is working fine! Modifying the slave ini was the solution. Patching some Caesar files from old version has done the rest. Best regards Martin XDOS 7/2016 64Bit |
|||
16-08-2016, 11:08 AM,
Post: #5
|
|||
|
|||
RE: CAL 830 error-Solution needed!
What do you mean "R & D" ?
please tell me |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
MB W205 C220 CDI CRD3 - Adblue error no start | Platinum | 1 | 22 |
8 hours ago Last Post: mercis |
|
Xdos 2024.03 version _ novapdf error[Solved] | smlee747 | 0 | 147 |
09-04-2024, 08:33 AM Last Post: smlee747 |
|
Xentry error | nixte | 4 | 156 |
08-04-2024, 11:52 AM Last Post: nixte |
|
Xentry 09/12.2021 WIFI Solution | gcs190 | 11 | 4,896 |
29-02-2024, 13:33 PM Last Post: gcs190 |
|
addons error | maxs30 | 0 | 87 |
11-02-2024, 14:17 PM Last Post: maxs30 |
|
DTS 8.16 License Needed | immo1 | 7 | 1,863 |
16-01-2024, 17:22 PM Last Post: MercFavor |
|
xentry start error | Ahson wajid | 6 | 403 |
15-11-2023, 18:29 PM Last Post: Automotive 1 |
|
Could not extract script from EXE xentry installation error | Automotive 1 | 0 | 144 |
08-11-2023, 06:29 AM Last Post: Automotive 1 |
|
Check the ETC device error - removing DSRC unit NTG 5.5 | andsol | 0 | 121 |
29-10-2023, 08:02 AM Last Post: andsol |
|
Xentry doesnt start error | chillaaa | 6 | 588 |
05-10-2023, 16:15 PM Last Post: gcs190 |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content