[raffy haddad]

I will try it as soon as possible and will
Report here
If i make these connections and didn't read
Pin code it is ok but i hope don't harm the ecu

[mar.wo]

Guys, its not matter which age of car is, it can read only pin codes from vehicle which have Can Low and Can High on OBD port...206 dont have those can lines in obd even if is 2011, and it can read only from CAN buss messages between bsi and working key, and I dont think so that will read if you catch can lines between ecu and bsi...but you can try, its nothing for loose...and you can try to read pin code without transponder in key, that is also interesting...

Mate are you sure it works that way? I mean i dont have that device and never saw it, but i think simillar PSA pin code read tools (avdi,smok....) read out BSI eeprom dump over obd and pull out PIN code that display to user. Nothing to do with key or "intercepting" can communication, you just need to power it up , using either key in car or just power it up on bench....
Hi
For this reason i world like to give concret number of pin and which socket but i need 6

Not work on same way mate, I think it read pin code from CAN messages, that is logical answer because cant tell you pin code if you lost all keys and cant tell you on cars which have diagnose over K line, if reading eeprom that tool will know pin code even if you dont have working key. Because that I suppose will not read pin code on bench or some similar method...that is my opinion from what I read about this tool. I will order tomorrow and will test it in next period, think this tool its not useless, because will be paid by one customer, or maybe two...thats reason of buying

@ruffy its simple open some software where you have wiring diagram, and you will find wires CAN Low and CAN High, you will saw are they go to OBD, and you will saw colors to, just split all wires near Engine ECU and find those colors, after you find it catch it with some test probes, and connect to obd on f108 to 14 and 6 (14pin is Can Low - 6pin is Can High), and connect also 16pin 12+ and 4+5pin Ground, and you can go try reading

Hi i've asked for 6 7 8 charakter of VIN no, i can give no of pin and which socket for safe . I've listed ecu's for PSA.

[raffy haddad]

Finally a couple of days ago ice replied
Me and said that it can not read 206 without full can
It made to 206 under 2008 with full can
And in their description it is made for cars
2008 and up
????????

[raffy haddad]

Hi all
Mr mar wo
Can you please advise
Peugeot 206 xline mod 2006
Vin vfr2AKFWF6w0038
With jc ecu

[mar.wo]

Hi all
Mr mar wo
Can you please advise
Peugeot 206 xline mod 2006
Vin vfr2AKFWF6w0038
With jc ecu

Hi
Yes, no problem but morning from garage

[raffy haddad]

Hi ok thanks
And hope your good

[raffy haddad]

Hi ok thanks
And hope your good

This is the ecu picture

[mar.wo]

Hi ok thanks
And hope your good

Hi
i've sent 2 U PM.

[raffy haddad]

Yes i read them and i did reply
And i put picture to tell you its a jc ecu
And not sagem
Regards

[mar.wo]

Yes i read them and i did reply
And i put picture to tell you its a jc ecu
And not sagem
Regards

I've received Ur PM but it's empty, no content. Check pinout for Jc ecu and try in this same way.