Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Update lexia/pp2000 to diagbox v 7.2 .7....
12-01-2014, 15:47 PM,
Post: #31
|
|||
|
|||
RE: Update lexia/pp2000 to diagbox v 7.2 .7....
|
|||
Reputation: +2 - cammy25 [+1] , Faisc@ [+1] | |||
28-01-2014, 19:32 PM,
Post: #32
|
|||
|
|||
RE: Update lexia/pp2000 to diagbox v 7.2 .7....
(18-12-2013, 16:09 PM)sindy Wrote: This schematic tested by me work perfect If i updating to MCU with this bin, and after the sw update to 4.3.0, then working with diagbox 7.2? And please shared the winbond chip content? (18-12-2013, 16:09 PM)sindy Wrote: This schematic tested by me work perfect If i updating to MCU with this bin, and after the sw update to 4.3.0, then working with diagbox 7.2? And please shared the winbond chip content? |
|||
15-02-2014, 10:12 AM,
Post: #33
|
|||
|
|||
RE: Update lexia/pp2000 to diagbox v 7.2 .7....
I found this text on net about update firmware PSA interface via USB to new version diagbox 7.xx, also "PSA Interface Checker v3 by mr.Scarymistake" I receive from some chinese guys.
I not tested this, and if some want to make this procedure, I wait feedback report work or not on CAR. Also I upload "PSA Interface checker v3" and "appli_4_3_0.com" file Good Luck Edit: New info: Added winbond [.bin] file. This files is for using external programmers. I think with UPA USB can do this job... Note: Much more useful info you find in previous posts from mr.titoun. |