Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA-D 3.56.31.17089 Standalone
|
02-12-2016, 18:06 PM,
Post: #61
|
|||
|
|||
|
RE: ISTA-D 3.56.31.17089 Standalone
Do it yourself
|
|||
|
![[+]](https://cartechnology.co.uk/images/CarTechnologyTheCure/collapse_collapsed.png)
|
02-12-2016, 18:47 PM,
(This post was last modified: 02-12-2016, 19:30 PM by Robocop25.)
Post: #62
|
|||
|
|||
RE: ISTA-D 3.56.31.17089 Standalone
(02-12-2016, 18:06 PM)SCOTT Wrote: Do it yourself Wow  That's all only 1 byte change, thank you ! Now i need only support/configuration for programming F-Series with this version. Are you sure on all versions same adress ? I have on that position low-value (00) ! I have found this in config : <!-- if false, no FASTA data will be generated at all --> <add key="FASTAEnabled" value="true" /> If i change this parameter to false that would switch FASTA off and do the same job as NOFASTA patch ? |
|||
|
|
|
03-12-2016, 06:07 AM,
Post: #63
|
|||
|
|||
RE: ISTA-D 3.56.31.17089 Standalone
(02-12-2016, 18:47 PM)Robocop25 Wrote: I have found this in config : With hex change, FASTA is still generated and you can still pull up previous sessions. If you edit config file, then nothing is generated in FASTAOut. |
|||
|
|
|
03-12-2016, 22:02 PM,
Post: #64
|
|||
|
|||
|
RE: ISTA-D 3.56.31.17089 Standalone
|
|||
|
|
|
03-12-2016, 22:21 PM,
Post: #65
|
|||
|
|||
RE: ISTA-D 3.56.31.17089 Standalone
(03-12-2016, 22:02 PM)Robocop25 Wrote:(03-12-2016, 06:07 AM)Almaretto Wrote: With hex change, FASTA is still generated and you can still pull up previous sessions. If you edit config file, then nothing is generated in FASTAOut. I do not have 3.56.31 still installed, so I could not say. |
|||
|
|
|
04-12-2016, 08:56 AM,
Post: #66
|
|||
|
|||
RE: ISTA-D 3.56.31.17089 Standalone
(03-12-2016, 22:02 PM)Robocop25 Wrote:(03-12-2016, 06:07 AM)Almaretto Wrote: With hex change, FASTA is still generated and you can still pull up previous sessions. If you edit config file, then nothing is generated in FASTAOut. Then try this but backup first . last post in thread . http://cartechnology.co.uk/showthread.php?tid=5346 |
|||
|
|
|
04-12-2016, 16:57 PM,
Post: #67
|
|||
|
|||
|
RE: ISTA-D 3.56.31.17089 Standalone
The hex address can/will vary from one version to the next.
Email: [email protected] Skype: [email protected]
HU Engineering Tool MGU Engineering Tool - now with field update mode via Feature Installer. Coding 2.0 |
|||
|
|
|
27-10-2018, 10:14 AM,
Post: #68
|
|||
|
|||
RE: ISTA-D 3.56.31.17089 Standalone
Disable FASTA for Rheingold 3.53.13
|
