Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Bmw F10 ZGW flash
25-07-2016, 04:09 AM,
Post: #1
|
|||
|
|||
Bmw F10 ZGW flash
Hi guys!
I need to flash ZGW due some issues. Is it ok to flash ONLY ZGW to the latest I-step and leave the rest of the modules to the shipment I -step (car never had a software update)? Thanks! |
|||
25-07-2016, 10:53 AM,
Post: #2
|
|||
|
|||
RE: Bmw F10 ZGW flash
It's not preferable but yes you can do that.
MGU virgin and patching in Europa.
Secure coding 2.0 Feature installer codes |
|||
26-07-2016, 07:44 AM,
Post: #3
|
|||
|
|||
RE: Bmw F10 ZGW flash
Thanks guys for your inputs!
Eventually I did it with esys and enet over gateway connection. Everything is ok. |
|||
24-10-2016, 12:10 PM,
Post: #4
|
|||
|
|||
RE: Bmw F10 ZGW flash
Some ZGW's are more problematic to flash over ENET than others, FYI, here's my verified procedure for flashing ZGW with ENET which works for at least my 09/11 ZGW.
1. Assign 192.168.0.1 as static IP to the laptop's NIC 2. Run tftpd DHCP's server. In settings: pool starts at 192.168.0.2, pool size 1, default gw 192.168.0.1, subnet mask 255.255.0.0. Do NOT close tftpd 3. Connect laptop with ENET <-> OBD2 cable 4. Make sure that the car gets 192.168.0.2 as assigned IP <- this allows swDeploy to finalise OK. 5. Start e-sys, connect via GW use 192.168.0.2:6801 as connection traget, select correct series 6. TAL processing - select the already calculated TAL and SVT target, in ECUs unselect everything except for swDeploy for ZGW 7. Go to parameters uncheck activate programming mode setting <- this allows post-flash ops to complete OK 8. Check software compatibility, press start 9. Remember to check activate programming mode for then next flash |
|||
24-10-2016, 17:21 PM,
Post: #5
|
|||
|
|||
RE: Bmw F10 ZGW flash
I programed several ZGW and ZGW2 with ENET and normal TAL calculation and never had any problem.
|
|||
24-10-2016, 20:06 PM,
Post: #6
|
|||
|
|||
RE: Bmw F10 ZGW flash
I have tested whit error i dont can update zgw
I have error Abortedbyerror (C207) |
|||
24-10-2016, 20:21 PM,
Post: #7
|
|||
|
|||
RE: Bmw F10 ZGW flash
As I was saying it depends on the HW-ID of the ZGW - there are probably 10-15 versions some flash via ENET without problems, others are impossible without ICOM A2. This is what worked for me (i-step 09/11).
|
|||
06-01-2017, 22:05 PM,
(This post was last modified: 06-01-2017, 22:06 PM by warhol99.)
Post: #8
|
|||
|
|||
RE: Bmw F10 ZGW flash
HI help, please...
I try flash ZGW via ICOM with ISTA P...bootloader done ,but then show some error ....now car is dead, ISTA ask me vehicle order so i try flash ZGW via ENET and ICOM with esys ...same error....TAL,SVT calculated, FA loaded, unchecked switch ecu....connected via GW X.X.X.X:6801 (ENET) i use dhcp server, esys 3.27.1 Press Thanks and Reputation, if my post helped you.
|
|||
06-01-2017, 22:46 PM,
Post: #9
|
|||
|
|||
RE: Bmw F10 ZGW flash
Not all ZGW01 before 0911 gave problems to update firmware with ENET or change settings, I think High version (more channel flexray) no problems, basis version problems
BMW F10 530d 0911
Retrofit 223 245 248 2VB 2ND 316 337 4M5 416 ->451/488-->456 453 465 494 496 552 5AD 5AE 5AG NBT 654 FM2 610 620[CIC] 688 6NR 6WA & 6WB715 760 8TH-KAFAS2-FSC KeyFOB Mperformance Gxx Series |
|||
07-01-2017, 08:31 AM,
Post: #10
|
|||
|
|||
RE: Bmw F10 ZGW flash
I have ok flash zgw whit icom and ista p , whit enet i dont can update zgw
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content