Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Ford focus 2010 Calibration and manual
31-07-2016, 10:39 AM,
Post: #1
LFord  Ford focus 2010 Calibration and manual
Hi again
i need calibration codes for ford focus
VIN: WF0FD95L0ALK19141

i also need repair manual and wiring for this car because it's german ford (MFG by ford werke gmbh) it's different with USA focus work shop


Attached Files Thumbnail(s)
   
Quote this message in a reply
06-08-2016, 09:51 AM,
Post: #2
RE: Ford focus 2010 Calibration and manual
If someone sends me just calibration it will be very good
tnx
Quote this message in a reply
06-08-2016, 22:33 PM,
Post: #3
RE: Ford focus 2010 Calibration and manual
I think you should give the gem module closer look because the only module ids is seeing is the ipc al module is connected by the gem indeed see the connetors on the uppef levt side of gem and on the down side the 2connectors get loose and then there are no comunication to the othef module check dlc 3-11 and 6-14 there should be 60ohm +- 2 ohm
Quote this message in a reply
09-08-2016, 11:24 AM,
Post: #4
RE: Ford focus 2010 Calibration and manual
(06-08-2016, 22:33 PM)sev611 Wrote:  I think you should give the gem module closer look because the only module ids is seeing is the ipc al module is connected by the gem indeed see the connetors on the uppef levt side of gem and on the down side the 2connectors get loose and then there are no comunication to the othef module check dlc 3-11 and 6-14 there should be 60ohm +- 2 ohm

thanks i will check can network ohms but when i was connect MS can from radio to GEM module (direct) it's passed the network test but not any other modules pass the test
and i need wiring diagram for testing can on PCM socket side
my main problem is finding CAN wires on pcm

this is my GEM module and all ceonnector are connected and seems to be ok
(two sockets is on back side)
[Image: E88709_EUR.JPG]
Quote this message in a reply
13-08-2016, 09:40 AM,
Post: #5
RE: Ford focus 2010 Calibration and manual
I have tried to print some wireing diagrams as pdf but dont know how to attach them to this post
ps i think i found out
rgds sev
etis.dealerconnection.com_wiring_prepareEmbeddedSVG.pdfpats.pdf
File Type: .pdf
Downloaded: 37 times
Size: 136.44 KB



Attached Files
etis.dealerconnection.com_wiring_prepareEmbeddedSVG.pdf1.pdf
File Type: .pdf
Downloaded: 23 times
Size: 127.1 KB

Quote this message in a reply
[+] 4 users say Thank You to sev611 for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  ford transit bcm Bk2t-14b476-BU - clone / virgin bboctavian 1 63 8 hours ago
Last Post: bboctavian
LFord Ford S-MAX 2006 gizmo220 1 21 25-03-2024, 22:32 PM
Last Post: toutou_gsm
LFord License for Ford IDS FJDS FRDS until 2025. blerim shehi 5 845 20-03-2024, 08:42 AM
Last Post: WANGUO
  Ford IDS 130.01+Upd 130.04, FDRS 39.6.8, FJDS 130.01+Upd 130.04 + PATCH 1.1.3.1 DoZe 55 11,873 19-03-2024, 00:35 AM
Last Post: DoZe
  Need Wiring Diagram Ford Transit 2.0 ToolSet 4 117 06-03-2024, 21:25 PM
Last Post: ToolSet
LFord FORD MONDEO VBF files rasmoka 1 126 20-02-2024, 18:06 PM
Last Post: fordmidabil
  2012 Ford fusion calibration file koziol 2 72 15-02-2024, 17:02 PM
Last Post: pupu144
LMazda Module Build Data As Built FORD MAZDA Adam0773 76 41,137 13-02-2024, 21:51 PM
Last Post: kautuvera
LFord Ford UCDS 2.0.7.x with UIII PLUS Loader vierchatura 0 177 12-02-2024, 19:04 PM
Last Post: vierchatura
  Ford KA 2 self-teaching trigger wheel Tomate 2 90 25-01-2024, 22:45 PM
Last Post: Tomate

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content