[Vish]

Hi All
ECU HW:9666360280
SW:9666484680
I am IN desperate need of your help

I read a peugeot boxer 111 ecu using Ktag and kess both give me 832kb,
when i get a donor ecu and read i also get the same.I seem to think that this is incorrect according to the posts that i have been reading.
Both the readings are done in boot mode.
1.Could this be caused because of only partial reading done through ktag and kess
2. Is immo data sitting together with maps in the same part of the micro.
3. What are the possibilities that could be wrong with the read.
4.AFTER READING BSI(95160) AND ST10F276 OF DONOR AND PUTTING IT INTO ORIGINAL ECU I HAVE NO COMS WITH ALL ECUS ON THE VEHICLE
5.Could i have a set (bsi and ecu)of files so that i could add a key and start the vehicle.
6.Can some light be shed on this subject.

Thanks in advance

[Gietek1]

Its Ok file lenght

[Vish]

Thank you for your prompt reply.would it usually contain the immo data in it.