[kelddamsbo]

Thanks a lot simonchs, it worked:
I ended up with doing this:
1) Read out FA(VO) from old FEM with Esys 3.27.
2) Replaced FEM with new one.
3) Started Esys 3.27 and wrote FA(VO) from 1
4) Inserted CAFD in to FEM_BODY, and coded FEM_BODY
5) Started Tool32 and intialized Flexray
6) Disable transport mode ISTA
7) Run the "Reset starter lock" under Service functions -> Power train -> Engine start in ISTA
8) Run initialize Flexray in ISTA

[inspi1981]

You can read FA from backup and then write to new FEM

[kelddamsbo]

You are right, it's easier and you also get i-step and other data over

[pweber84]

Anyone knows how to reset flexray via Tool32 in FEM?
I will have a brand new FEM tomorrow and I need to program it using Esys and tool.
Thank you