[arcelik]

No the old fem function withou any problem. But i try to install the e-sys but i can't connect to the car. Can you show me a link where is the Esys complete ( for download). And a Instruction? Because im from Germany and my english is not so perfect

Thanks for all

[pshoey]

You need to use E-SYS to save the FA from the old FEM. Don't think you can with ISTA.

[arcelik]

Ok tomorrow i try it with esys

[arcelik]

With E-sys you can read and save VO to a file.
If you don't have ISTA license and you are not online, this is the way you can transfer the car VO to the new FEM.
If you have ISTA licence and you are connected to BMW servers, then ISTA-P will download VO automatically and insert it into the new FEM.

@Lpapp have you read at all that I'm writing for VO(FA), not for FEM "configuration" which is actually coding.
It does not matter that new FEM has new hardware and firmware, VO is the same as with old FEM.

@arcelik a step by step is:
1. plug your old FEM (I hope it is not completely dead and you can still read VO from it) read VO and save it to a file with e-sys.
2. Disconnect old FEM and plug new FEM, then connect with e-sys to the car, go to VCM and load VO from the file you saved previously. Then go to master tab and click "write FA" which will write the car VO to the new FEM.
3. Start ista-p and when you see window for replaced modules click Yes and when you see the list, in the bottom tick FEM. ISTA-p will code(configure) and initialize the new FEM to the car.

That's it. Happy coding.

I have just 2 Problems:
What mean you with VO? U mean FA?
I read the FA( from old FEM, then plug the new FEM)
Go to VCM
If go to the master tab i can´t click " write FA"?
Look here is picture

[lynxbmw]

VO is FA but on english.
Right click on FA folder and chose "calculate FP", then button "write FA" will be enabled.

[arcelik]

Thanks i will try it tomorrow morning.

[arcelik]

Thanks i will try it tomorrow morning.

I write the FA with Esys and than open ISTA-P and i get the same Error by coding. Here a picture

http://www.bilder-upload.eu/show.php?fil...535176.jpg

[Lpapp]

Thanks i will try it tomorrow morning.

I write the FA with Esys and than open ISTA-P and i get the same Error by coding. Here a picture

http://www.bilder-upload.eu/show.php?fil...535176.jpg

I think you don't read my post, i change allready about 30 fems, i know what i tell you.
Ofcouse you can try several times another way

[arcelik]

Lpapp i do it already how u say. I try it 3-4 Times but the same problem.

Than i try it with esys and than ista, but the same problem.

There is writing: ZGW/FEM can not start

[Lpapp]

Lpapp i do it already how u say. I try it 3-4 Times but the same problem.

Than i try it with esys and than ista, but the same problem.

There is writing: ZGW/FEM can not start

you have old istap, because i see on screenshot I-Soll 15-07-502

Maybe you got new FEM that not supported by 15-07-502