[arcelik]

Ok. What can i do now? Which files must i change? The psdzfiles?

[BMWzone]

Ok. What can i do now? Which files must i change? The psdzfiles?

You need a new version (latest) of ISTA\P 3.59.(3), isn't reccomended change only psdzata in ISTA\P,
or upgrade psdzdata on esys.
Usually new ECU from BMW AG have inside latest firmware, you have old version

[Lpapp]

Ok. What can i do now? Which files must i change? The psdzfiles?

please try to search on forum latest istap thread, download and install this version, than try again.

latest version is ISTA\P 3.59.3.002, but i think with main installation you will be also happy.

[arcelik]

Ok thank you i try it tomorrow

[arcelik]

So after 1 Week my Car starts again =)
But during the Update with Ista-P some Ecu can't coded.
Here is a PDF from the final report.

[Lpapp]

Please read this thread http://cartechnology.co.uk/showthread.php?tid=9162
especially http://cartechnology.co.uk/showthread.ph...#pid168398

and it would be nice to get rep + thanks for ur help

[Nunaat]

I have the same problem with changing fem. I tried to start the fem coding ecus by esys after write fa in new fem and start flexrelay with ista+. Everything works fine but car engine doesnt start. If I use istap 3.62 with latest psdzdata files ista p tell me change most ecus retrofitted like dkombi (6wb) and ACC. it will be possible to use istap to start again de car without changing retrofitted ecus?
thanks for your help advance.

[arsent]

Unlock   starter in service function in ISTA.

[kelddamsbo]

I tried to replace my FEM MID to a FEM MAX in my F30 LCI.
I want that to be able to retrofit option 322 (comfort access) and 563 (light package)
I have bought a brand new FEM from BMW, it should be coded with VIN and keys.
Here is what I have done:

1) Read out FA(VO) from old FEM with Esys 3.27.
2) Replaced FEM with new one.
3) Started Esys 3.27 and wrote FA(VO) from 1
4) Inserted CAFD in to FEM_BODY, and coded FEM_BODY
5) Started Tool32 and intialized Flexray
6) The car could not start
7) Gone into ISTA+, and tried to select replace FEM, but it would change my KOMBI and also remove my FLA, I do not want to do this.

Is there a way to select which tasks I want to do in ISTA, or can one only run all tasks ?
Can I do something in E-sys, and avoid ISTA+ ?

Please help.

By the way, I put back the old FEM, and the car runs without errors.

[simonchs]

I tried to replace my FEM MID to a FEM MAX in my F30 LCI.
I want that to be able to retrofit option 322 (comfort access) and 563 (light package)
I have bought a brand new FEM from BMW, it should be coded with VIN and keys.
Here is what I have done:

1) Read out FA(VO) from old FEM with Esys 3.27.
2) Replaced FEM with new one.
3) Started Esys 3.27 and wrote FA(VO) from 1
4) Inserted CAFD in to FEM_BODY, and coded FEM_BODY
5) Started Tool32 and intialized Flexray
6) The car could not start
7) Gone into ISTA+, and tried to select replace FEM, but it would change my KOMBI and also remove my FLA, I do not want to do this.

Is there a way to select which tasks I want to do in ISTA, or can one only run all tasks ?
Can I do something in E-sys, and avoid ISTA+ ?

Please help.

By the way, I put back the old FEM, and the car runs without errors.

The answer is just above of your question post.

Run the "Reset starter lock" under Service functions -> Power train -> Engine start in ISTA.