Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Which tool to buy for airbag dump
22-09-2016, 14:27 PM,
Post: #1
|
|||
|
|||
Which tool to buy for airbag dump
Hi,
it's not clear to me which is the right tool to buy for reading and writing to airbag ecu, better if using pogopins without solder: carprog, galletto, kess, or ? |
|||
22-09-2016, 15:19 PM,
Post: #2
|
|||
|
|||
RE: Which tool to buy for airbag dump
(22-09-2016, 14:27 PM)chicco Wrote: Hi, pigopins none of this caprog ok for eeprom clip better get programmer like upa , hot air station cheers off: kess galletto etc are not for airbags also u will need some softwares to clean up dumps |
|||
Reputation: +2 - volavka [+2] | |||
22-09-2016, 15:44 PM,
Post: #3
|
|||
|
|||
RE: Which tool to buy for airbag dump
As Mr.blackpirate said , upa and xprog enough for read memory from airbag modules
else you need drop original dump in forum, we will clear crash for you ASAP Good luck BEST CHIPTUNING SERVICE BY Zenter Performance
Contact Skype: zenter-88 Facebook: https://www.facebook.com/ZenterPerformance -------------------------------------------------------------------------------------------------------------- highest Quality ChiPTuninG Files BY PTF Team https://performance-tuningfiles.com/ POWER BY TECHNOLOGY -------------------------------------------------------------------------------------------------------------- BEST CHIPTUNING SERVICE BY Jurebv Contact Skype: live:jure.coric_1 https://files.tuning-makarska.com/ -------------------------------------------------------------------------------------------------------------- - IMMO/ECU , ODO , AIRBAG , CARRADIO , TESTED SOLUTIONS UNDER MY SOFTWARE In progress TUNING STAGE1/DPF/SCR/EGR/TVA/FLAP/ START STOP OFF Software WHAT'S NEWS ! -Steering Angle Sensor Restore For LEXUS,TOYOTA,SUBARU,MITSUBISHI,VAG -Citroen DS5 Steering lock Renew/Write Code by dumps -Passat CCM Repair corrupted dump succes -VAG ECU SIMOS PCR 2.1 KM WITH CRC CORRECTED ! -IMMO OFF For NISSAN/INIFINITI with HITACHI ECU | CPU SH705X -Dacia Dashboard with Fujitsu MB96F6A6 Change km/Block Synchro Dash-ABS -=[Full WinOLS/ECM Titanium User] =- Remember! dirty hands are a sign of clean money шшш.αήkαbôôτ.Ćô.цk |
|||
22-09-2016, 16:05 PM,
Post: #4
|
|||
|
|||
RE: Which tool to buy for airbag dump
So no solderless solution for airbag,i'm right? like there is for galletto with bdm frame with pins
|
|||
22-09-2016, 17:52 PM,
Post: #5
|
|||
|
|||
RE: Which tool to buy for airbag dump
No. galletto does not even read airbag eprom. galletto is for ECU where flash (tuning) and eprom (vin,immo,km) is stored. Airbah does not restore in that ECU
|
|||
23-09-2016, 13:57 PM,
Post: #6
|
|||
|
|||
RE: Which tool to buy for airbag dump
(22-09-2016, 17:52 PM)Vbomb Wrote: No. galletto does not even read airbag eprom. galletto is for ECU where flash (tuning) and eprom (vin,immo,km) is stored. Airbah does not restore in that ECU i understand that galletto is only for ecu. i would like to know if there is a solution for car prog or xprog based on the use of a plexiglass frame and pressure pins without soldering like exits for galletto. |
|||
24-09-2016, 05:16 AM,
Post: #7
|
|||
|
|||
RE: Which tool to buy for airbag dump
(22-09-2016, 14:27 PM)chicco Wrote: Hi, Ultraprog it is very good tool with programmer and software, in full packet include all adapters for to read and write your eeprom's!! Also it has a very good support and very helpfull forum and it is not expensive for original tool !! It make updates every 1-2 months !! Try it!! |
|||
24-09-2016, 18:30 PM,
Post: #8
|
|||
|
|||
Which tool to buy for airbag dump
Carprog is ok for airbag
Sent from my iPhone using Tapatalk |
|||
24-09-2016, 20:54 PM,
Post: #9
|
|||
|
|||
RE: Which tool to buy for airbag dump
Hi. I checked on the ultraprog site but It seems that latest update i of january 2015.are you sure the product and the Company is still operative and updated?
Inviato dal mio Nexus 5 utilizzando Tapatalk |
|||
27-09-2016, 12:09 PM,
Post: #10
|
|||
|
|||
RE: Which tool to buy for airbag dump
(24-09-2016, 20:54 PM)chicco Wrote: Hi. I checked on the ultraprog site but It seems that latest update i of january 2015.are you sure the product and the Company is still operative and updated? Maybe you make a mistake. PRESS HERE it is the best solutiom with good money !!!! |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content