[genius76]

Hi
Ned help
407 2.0 hdi 2006
using x-tool
Remowed dash
Reade mileage BSI obd done corect
readed mealage x-tool 93c66 shows wrong milage even on swap bits
puted on carprog read corect mealage, on write error weritifi and new epprom only fffff 000000

car starts but dash going crize dig. display just laights and blinking nothing shows neadle for water on max

read again carprog error version not recognise
xprog reads ffff00000 only

ori dash itis first reading with xprog
ghg reading thas hapens after all

can help any body?
Thanks

[km666]

Dump is the wrong!Desoldered eeprom 93C66?

[genius76]

Thanks for answer Yeas mate

---

desolder shoisen 8 bits readed

---

any chances to repair now?

[km666]

Write new dump with 16 bits.only use 16 bits.

[genius76]

New dump ? that i dont have new dump

[km666]

You have serial in dash.Need dump with this serial.

[genius76]

U mean A2C53187279

---

Thanks That works now!!!

---

ok now what shows km but not ml how to switch it?

[genius76]

Dump works fine but in km on dash display

somebody hawe dump with ml

[genius76]

Here is serial any help Thanks