[jpbroad1970]

Hi

can someone please give me some advice

I have a citroen C4 1.6 hdi 110 non fap 2008
it has the edc16c34 bosch ecu.

I purchased a china clone galletto lead to do remap.....is it possible on these ecu's without removing them.

I have read rightly or wrongly that it can wipe injector codes and allsorts out as it doesn't take a complete copy of ecu

the other option im thinking of is getting another ecu off another c4 and try to reflash with immobilser removed egr removed and a tuned file . does that make any sense possible or not

thanks in advance, just don't fancy bricking my car

John

[teamtuner]

Hi

can someone please give me some advice

I have a citroen C4 1.6 hdi 110 non fap 2008
it has the edc16c34 bosch ecu.

I purchased a china clone galletto lead to do remap.....is it possible on these ecu's without removing them.

I have read rightly or wrongly that it can wipe injector codes and allsorts out as it doesn't take a complete copy of ecu

the other option im thinking of is getting another ecu off another c4 and try to reflash with immobilser removed egr removed and a tuned file . does that make any sense possible or not

thanks in advance, just don't fancy bricking my car

John

you can use without problem read-write by obd this ecu...it will read-write only flash

[jpbroad1970]

Hi

can someone please give me some advice

I have a citroen C4 1.6 hdi 110 non fap 2008
it has the edc16c34 bosch ecu.

I purchased a china clone galletto lead to do remap.....is it possible on these ecu's without removing them.

I have read rightly or wrongly that it can wipe injector codes and allsorts out as it doesn't take a complete copy of ecu

the other option im thinking of is getting another ecu off another c4 and try to reflash with immobilser removed egr removed and a tuned file . does that make any sense possible or not

thanks in advance, just don't fancy bricking my car

John

you can use without problem read-write by obd this ecu...it will read-write only flash

thanks very much I will read my ecu and post if anyone can help

[jpbroad1970]

Have just tried reading, it gets to 50% comes up with a message to switch on and off but has an error code errore dati1 -8

any ideas

[teamtuner]

Have just tried reading, it gets to 50% comes up with a message to switch on and off but has an error code errore dati1 -8

any ideas

maybe need to select your ecu nk-line
whan said switch off...you do this and wait until it said switch on...is moment that recode injectors

[jpbroad1970]

I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times

[ROD-BENDERS]

I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times

Dont use 1260 get a 54 clone ok

[teamtuner]

I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times

Dont use 1260 get a 54 clone ok

uhhh..too much money for tune a car.......better to send to a tunner to do this job...

[jpbroad1970]

I've ordered mpps spent more money lol. So hopefully that will work

[teamtuner]

I've ordered mpps spent more money lol. So hopefully that will work

more money?...15 euro?
mate...take kess or fgtech 5.4...