[Lucian Mc]

Im offering for cartech members the folowing .
Winols 2.24+2.26
Ecm Titanium 26000 drivers
10 GB OF DAMOS
15 gb of winols tutorials on learning about tuning ,dpf off ,egr off ,searching properly a map etc.
Alot of virgin files and some bdm files
ASK FOR LINKS IN PRIVATE MESSAGE
LINKS ARE SENT VIA PM AFTER HITING THX+REP BUTTON .

PM for link, do NOT post in thread for it, it will be removed.

Thanks, Admin.

[Lucian Mc]

Can any one share the opinions about the pack and maybe help to make it bigger so that other will gain more informations too ?

[techdoc]

If your using the same links you're sending out on another forum my feedback is that the links are dead.

[Lucian Mc]

The links work perfectly. If you do not know how to use mega.nz links it is strictly your problems sir . To install WinOls from a user that gave his time to do a short tutorial :
1. Install "setup.exe"

2. Take the following 3 files:
EVC_key.dll
EVClicenceMOD.dll
loader_ols_32bit

and put them here:
C:\Program Files\EVC
***THIS IS WHERE MINE WAS GOING WRONG, SETUP.EXE AUTOMATICALLY INSTALLS THE EVC FOLDER INTO "PROGRAM FILES (X86)" IF THIS IS THE CASE, MOVE THE WHOLE "EVC" FOLDER INTO THE NORMAL PROGRAM FILES, NOT PROGRAM FILES X86***

3. Install "winols_testversion.exe" and run through the setup, just keep clicking yes/OK. At the end of the install it will launch the program, let it do that, but just close it after it opens, don't play around with it.

4. Go back into C:\Program Files\EVC and double click "loader_ols_32bit", this should bring up a window saying something along the lines of "Restart the app". If it says "error starting app", you've gone wrong somewhere. Take note of the red bit above ^

5. Go to start>control panel>add/remove a program>uninstall WinOls 2.14.03
This is the test version you just installed, DON'T delete the full version you installed first.

6. Again, go back into C:\Program Files\EVC and right click "loader_ols_32bit" and send to desktop. This will create a shortcut on the desk top. Then, on the desktop, delete the shortcut to WinOls. If you open WinOls directly it will mess it all up, you have to open the program by using "loader_ols_32bit" which now also has a shortcut on the desktop. I renamed the loader shorcut "WinOls" to simplify things.

Lastly, tune things, give them massive amounts of power, give horsepower to the people, fry tyres and make lots of noise.

[techdoc]

The links work perfectly. If you do not know how to use mega.nz links it is strictly your problems sir . To install WinOls from a user that gave his time to do a short tutorial :
1. Install "setup.exe"

2. Take the following 3 files:
EVC_key.dll
EVClicenceMOD.dll
loader_ols_32bit

and put them here:
C:\Program Files\EVC
***THIS IS WHERE MINE WAS GOING WRONG, SETUP.EXE AUTOMATICALLY INSTALLS THE EVC FOLDER INTO "PROGRAM FILES (X86)" IF THIS IS THE CASE, MOVE THE WHOLE "EVC" FOLDER INTO THE NORMAL PROGRAM FILES, NOT PROGRAM FILES X86***

3. Install "winols_testversion.exe" and run through the setup, just keep clicking yes/OK. At the end of the install it will launch the program, let it do that, but just close it after it opens, don't play around with it.

4. Go back into C:\Program Files\EVC and double click "loader_ols_32bit", this should bring up a window saying something along the lines of "Restart the app". If it says "error starting app", you've gone wrong somewhere. Take note of the red bit above ^

5. Go to start>control panel>add/remove a program>uninstall WinOls 2.14.03
This is the test version you just installed, DON'T delete the full version you installed first.

6. Again, go back into C:\Program Files\EVC and right click "loader_ols_32bit" and send to desktop. This will create a shortcut on the desk top. Then, on the desktop, delete the shortcut to WinOls. If you open WinOls directly it will mess it all up, you have to open the program by using "loader_ols_32bit" which now also has a shortcut on the desktop. I renamed the loader shorcut "WinOls" to simplify things.

Lastly, tune things, give them massive amounts of power, give horsepower to the people, fry tyres and make lots of noise.

That would be ok were it not for the fact that I have a pro user account (so I know what I'm doing) and the encryption keys being reported as wrong (for the links in the other forum)


Sent from my iPhone using Tapatalk

[Lucian Mc]

Up . This files was requested over 160 times and no one give the feedback if it is ok or not ....

[Leaking]

I left you reputation maybe u got more guides for winols for egr, dpf off and basic remap?

[Lucian Mc]

This is good for basic ..After this is better to learn on your own .

[Lucian Mc]

For the peoples who need this infos dont pm me every week asking for updates for WinOls or Ecm titanium ..... If you need updates go and buy the original one . Also this is a file sharing not a baby sitting to install to each pc all the stuff ..... Helping everyone and taking hours to fix the problems that they have with their pcs doesnt fill up the basket when i do shopping .

[BOJANGLOS]

I havn't tested everything but it is genuine install I did not see any embedded virus and installed it on a blank machine just to test. Follow the instructions and it works fine.

---

I havn't tested everything but it is genuine install I did not see any embedded virus and installed it on a blank machine just to test. Follow the instructions and it works fine.

Hmm something strange going on just tried to install this on my test xp machine and it automatically deletes a file. Will keep everyone posted as both of these machines I test software on because if they get virus or malware no issues