[IM6]

Please help
I changed the ECU to the use one ECU
I know that Flash and EEPROM are in the processor 29F800BB
I rewrote our original ECU (using FG Tech Galleto) on the use one ECU
I see that flash is the same as in orginale ECU but the car does not start

I needs to do initialization starting (Star Diagnosis), but I see that my computer is LOCK


I have a file from the original ECU and the ECU used
I need a Virgin file to my ECU was Unlock then or (immo OFF)
Then I will marry him he could with the car
Files are read FG Tech Gallleto
please help
tx

[mercis]

Please help
I changed the ECU to the use one ECU
I know that Flash and EEPROM are in the processor 29F800BB
I rewrote our original ECU (using FG Tech Galleto) on the use one ECU
I see that flash is the same as in orginale ECU but the car does not start

I needs to do initialization starting (Star Diagnosis), but I see that my computer is LOCK


I have a file from the original ECU and the ECU used
I need a Virgin file to my ECU was Unlock then or (immo OFF)
Then I will marry him he could with the car
Files are read FG Tech Gallleto
please help
tx

immo only flash,soldier ori to donor,or upload this

[IM6]

Soldering Processor nothing will help
ECU LOCK
I need UNLOCK ECU to do Initial setup .... in STAR DIAGNOSE
I see file Mercedes Renew is the same as Mercedes use one nothing is changed

[mercis]

Compare your dump,

[IM6]

YES
im Compare

[bawareca]

29F800 is a flash memory, not processor. You can only read partial dump with galletto, not full. The status of the ECU is stored in the flash, in the part which you cannot read with galletto. As mercis told you, just swap the flash, or remove replacement ECU flash and post here, someone will unlock it.

[IM6]

Exactly FG TECH reads only part not Full 100%

So I desoldering 29F800

Read to programmer and post here
maybe someone will unlock

so it has to be ??

ok im order programmer now

[DJAMY]

Hi

remove carfuly flash , read with programmer + adapter 44pin
beeprog , labtool....... are ok

post flash you will get help and procedure to success

[IM6]

OK


29F800BB I read on the programmer GQ-4x4
Can anyone help
As I wrote above I need to wear ECU used and marry it Star Diagnose
(Initial startup)

[mercis]

Bad dump,you must flash chip soldier and with willem read