Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Help read motorola hc05b6 0F10V with carprog
03-10-2016, 11:41 AM,
Post: #1
|
|||
|
|||
Help read motorola hc05b6 0F10V with carprog
Hello all I'm trying to read Motorola hc05b6 mask 0F10V with carprog a10 adapter But everytime I try to read it won't.
have done these Chips before with upa before successfully but wanted to try with carprog for some practice and to see if it was easier (ie no pin lifting ) White relay clicks erratically while trying to read on each of 5 attempts that carprog makes to read. Can anyone recommend how to read ie pinout or lift pins or if relay is dead ? If mine or others posts and info are helpful please give thanks/rep
|
|||
13-10-2016, 23:19 PM,
Post: #2
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
Did your carprog has been repaired? If not it wont work.
|
|||
15-10-2016, 09:40 AM,
Post: #3
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
(13-10-2016, 23:19 PM)perso69 Wrote: Did your carprog has been repaired? If not it wont work. Hello what repair do you mean ? If mine or others posts and info are helpful please give thanks/rep
|
|||
15-10-2016, 09:53 AM,
Post: #4
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
Clone or original? If clone, search for carprog repair
|
|||
15-10-2016, 09:58 AM,
Post: #5
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
A10 adapter:
-check solder connections -Check if R2 is present Don't PM me for SW keys, FRM, Licences, radio codes or similar, you will not get any answer...
|
|||
15-10-2016, 10:09 AM,
(This post was last modified: 15-10-2016, 10:20 AM by dil6222.)
Post: #6
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
(15-10-2016, 09:53 AM)perso69 Wrote: Clone or original? If clone, search for carprog repair is updated clone have already done repair apart from 12mhz crystal (15-10-2016, 09:58 AM)sixcode Wrote: A10 adapter:hello have already checked A10 and am sure the r2 was there I will check again later and let you know Also carprog manual isn't very clear with the colours. I checked on Carprog site and they have another diagram with same pins lifted as when you read with upa so pins all still need lifting I'll try it out and check A10 and I will get back to you. If mine or others posts and info are helpful please give thanks/rep
|
|||
19-10-2016, 23:20 PM,
Post: #7
|
|||
|
|||
RE: Help read motorola hc05b6 0F10V with carprog
(15-10-2016, 10:09 AM)dil6222 Wrote:(15-10-2016, 09:53 AM)perso69 Wrote: Clone or original? If clone, search for carprog repair You have Sixcode diagram, it come from original carprog. So color is not important, just check each wire and compaire with diagram. Also, be polite and click Thanks when members trying to help you for FREE. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content