Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Flash zgw whit esys
23-10-2016, 13:47 PM,
Post: #1
XZBMW  Flash zgw whit esys
Hello
I need flash update zgw in bmw f25 but i have error and the car it is dead in mode transport
I have guide the flash by esys in internet but dont work in my car
I have esys and enet cable whit esys 3.27

Any idea why dont work? O any solution
Quote this message in a reply
23-10-2016, 18:37 PM,
Post: #2
RE: Flash zgw whit esys
(23-10-2016, 13:47 PM)pica14 Wrote:  Hello
I need flash update zgw in bmw f25 but i have error and the car it is dead in mode transport
I have guide the flash by esys in internet but dont work in my car
I have esys and enet cable whit esys 3.27

Any idea why dont work? O any solution

Was just working with someone on this on another forum - couldn't help him out at the end. But it did flash for me with a DHCP server (tftpd64).

To take the car out out of transport mode just VO code any ECU - right-click on the ECU (e.g. something like the audio one) and select code. Do NOT click on Code Defaults - ever.

Here's what worked for me:

e-Sys 3.27.1, tftpd64's DHCP: Ethernet card set to static 169.254.0.1, pool starts at 169.254.0.2, pool size 1024, subnet mask 255.255.0.0, gw 169.254.0.1. Connection by ZGW's IP, swdeploy only. Completed OK, though C207 error when executing SVTsollupdate (which was fixed when I did the full flash -ZGW).
Quote this message in a reply
[+] 4 users say Thank You to Breach for this post
23-10-2016, 19:12 PM,
Post: #3
RE: Flash zgw whit esys
Ok
I have put 4 selc bflash,swdeploy,cddeploy,ibadeploy and you see also swdeploy?

I can obtain error for this selection?
Quote this message in a reply
23-10-2016, 20:21 PM,
Post: #4
RE: Flash zgw whit esys
(23-10-2016, 19:12 PM)pica14 Wrote:  Ok
I have put 4 selc bflash,swdeploy,cddeploy,ibadeploy and you see also swdeploy?

I can obtain error for this selection?

Normally only the swDeploy will be run anyway - this depends on the SVT Target (what i-Step you come from, what your hardware is) and what TAL was generated. Shorty answer - yes. An error is likely with ENET and ZGW wink
Quote this message in a reply
23-10-2016, 20:57 PM,
Post: #5
RE: Flash zgw whit esys
(23-10-2016, 20:21 PM)Breach Wrote:  
(23-10-2016, 19:12 PM)pica14 Wrote:  Ok
I have put 4 selc bflash,swdeploy,cddeploy,ibadeploy and you see also swdeploy?

I can obtain error for this selection?

Normally only the swDeploy will be run anyway - this depends on the SVT Target (what i-Step you come from, what your hardware is) and what TAL was generated. Shorty answer - yes. An error is likely with ENET and ZGW wink

I have from ilevel F025-10-503, now i update car full whit istap F025-15-07-502 but i dont can update zgw because istap tell me change zgw for other ref, because my car it is retrofit cic profesinal navi and now the cruise control dont work because zgw old firmnware

Can i put zgw used whit ref. Tell my ista-p? And reflash the zgw whit ista-p?

Or i update my actual zgw whit new firmnware by esys? But i have error , i read what varios zgw dont can update firmnware by esys
Quote this message in a reply
24-10-2016, 05:08 AM,
Post: #6
RE: Flash zgw whit esys
Yes, you can replace the ZGW with an used one (try to find one with a newer production date than your car and part number asked by ISTA-P).
Quote this message in a reply
24-10-2016, 05:50 AM,
Post: #7
RE: Flash zgw whit esys
(24-10-2016, 05:08 AM)lagunasec Wrote:  Yes, you can replace the ZGW with an used one (try to find one with a newer production date than your car and part number asked by ISTA-P).

Ok i found one by eBay i post result when i Have tested
Quote this message in a reply
04-11-2016, 23:56 PM,
Post: #8
RE: Flash zgw whit esys
What? Replace a ZGW because you can't update it? Send your contact info to me as a private message...Your original zgw will work just fine.
Quote this message in a reply
06-01-2017, 22:02 PM,
Post: #9
RE: Flash zgw whit esys
Help, please...

I try flash ZGW via ICOM with ISTA P...bootloader done ,but then show some error ....now car is dead, ISTA ask me vehicle order


so i try flash ZGW via ENET and ICOM with esys ...same error....TAL,SVT calculated, FA loaded, unchecked switch ecu....connected via GW X.X.X.X:6801 (ENET)

i use dhcp server, esys 3.27.1
   

Press Thanks and Reputation, if my post helped you. [Image: under.gif]
Quote this message in a reply
07-01-2017, 12:35 PM,
Post: #10
RE: Flash zgw whit esys
Turn off MSM update
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  [MEGA] Any ESYS Editions + PSDZ Full & Lite + ICOM Firmware + MANUALS + TOOLS hashtagmaster 102 34,730 Yesterday, 05:59 AM
Last Post: hashtagmaster
XZBMW BimmerUtility vs Esys Launchers diagso 555 106,436 26-03-2024, 11:41 AM
Last Post: PeterY
  I020 esys connection issue mcrussell 6 219 25-03-2024, 23:35 PM
Last Post: vanos
XZBMW Manual : How to Flash Any NBTevo ID4 to ID5 or ID6 ECE/US/ASIA FSCmap 183 51,498 25-03-2024, 18:58 PM
Last Post: DayvG
XZBMW E84 X1 25d with 8hp45x how to flash Alp*na or other EGS hasn38 0 85 23-03-2024, 00:26 AM
Last Post: hasn38
  mini r50 dashboard 3K91D pinout, dash bricked, i need flash and eeprom matiz 10 1,458 22-03-2024, 11:47 AM
Last Post: urgi
  GenEsys Creator (New Tool FA ESYS) scorpium59 405 29,268 16-03-2024, 21:08 PM
Last Post: scorpium59
  Sharing PSDZdata files between istaP and ESYS BMWlad 23 9,839 16-03-2024, 18:09 PM
Last Post: kuno24
XZBMW How to change VIN code in VCM via Esys? vipsha 5 1,333 14-03-2024, 22:20 PM
Last Post: tcp443
XZBMW xdrive off with esys without error in dash dankocg 11 2,271 14-03-2024, 13:41 PM
Last Post: Adekborys69

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content