[benyclaudiu]

1. Links to maps for RNS315 V8 East Europe.
https://www.youtube.com/watch?v=NoPuuJI2...e=youtu.be
1 - Card EVO + (I tried 32G and 64G SD)

2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected)

3 - Install Ubuntu 32/64 (64's what I used)

4 - Copy local (Desktop linux) folder VW

5 - open the copied folder and right cick -> "open terminal"

6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x".
If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64.
And the rights and check the "ll"

7 - Insert the SD slot. Terminal command "df" and verify the name card.
Somewhere down everything must occur "mmcblk0" + p + a number.
The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0".

CID To read the original SD:
cat / sys / block / mmcblk0 / device / cid
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

8 - Order To change CID terminal:

- Linux 32
sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

- Linux 64
sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

After this command will display:
Writing new CID: 5d53424c32424d31013917ca53010400
Success! Remove and Reinsert SD card to check new CID.


To read the SD CID changed:
SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC
cat / sys / block / mmcblk0 / device / cid
will be displaying the new CID 5d53424c32424d31013917ca53010400

9 - To lock SD terminal command:

- For Linux 32
sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277

- For Linux 64
sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277

After this command will display:
SEND_STATUS response: 0x00000900

Remove the card and fuguta car ..!

1. Link to download the content of the maps for RNS315 V8 East Europe.
https://archive.org/details/RNS315 here you and .zip torrent
OR https://ufile.io/eba56

2.You Need a Linux (Ubuntu) PC with integrated SD card reader. Linux 64bit
3.Only works with Samsung EVO + SD (Red One)

Steps:
Extract and copy the content on the SD top folder is navpsf_update
Look under / dev to see SD is yours Which, in my case it is mmcblk0

Copy folder on Desktop Linux and open folder CID VW Right click here and select "open terminal"
In the "terminal" put command:

sudo -s

Change the execution rights:

chmod 777 mmc32
or
chmod 777 mmc64

if you have 32 or if you have linux linux 64

Read original CID
cat / sys / block / mmcblk0 / device / cid

After this display original Will CID command:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Change the CID with the attached tool

Password command you know from Below:

- For Linux 32
sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

- For Linux 64
sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400

After this command Will display:
Writing new CID: 5d53424c32424d31013917ca53010400
Success! Remove and Reinsert SD card to check new CID.

Reinsert the card and remove it
Read new CID
cat / sys / block / mmcblk0 / device / cid

After this command Will new CID display:
5d53424c32424d31013917ca53010400

Now lock the card by password, it's not possible to unlock it with normal MMC
Driver, You Need a patched version of the kernel to be Able to unlock it.

Password command you know from Below:

- For Linux 32
sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277

- For Linux 64
sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277

After this command Will display:
SEND_STATUS response: 0x00000900

Enjoy your new maps!
http://richard.burtons.org/2016/07/31/ci...oplus_cid/
https://www.youtube.com/watch?v=tbWXsSaAb2M#t=467.63458
https://www.youtube.com/watch?v=DBl1H8CKJYY


"thanks" or "Add a reputation"