Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. Martech



Audi MMi 3G+ wrong update
26-10-2016, 15:55 PM,
Post: #11
RE: Audi MMi 3G+ wrong update
1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink
Reputation: +1 - elwis272 [+1]
Quote this message in a reply
[+] 1 user says Thank You to lolli11 for this post
26-10-2016, 17:07 PM,
Post: #12
RE: Audi MMi 3G+ wrong update
(26-10-2016, 15:55 PM)lolli11 Wrote:  1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink

read
Read again post # 1

Big problem is that i CANNOT ENTER GreenMenu again (because i dont have CAR+MENU combination available) so i can mark again "Ignore region and variant" and then flash back good firmware.


Few questions:

1. How to enter GreenMenu again ? I have a friend with ODIS Program. Is there a way to mark "Ignore region and variant" by this or by

If you like my post and it helped you, press Thanks or Like
Quote this message in a reply
26-10-2016, 17:16 PM,
Post: #13
RE: Audi MMi 3G+ wrong update
It is possible with B8 keys. You just need to figure it out.
Quote this message in a reply
26-10-2016, 17:20 PM,
Post: #14
RE: Audi MMi 3G+ wrong update
(26-10-2016, 17:16 PM)lolli11 Wrote:  It is possible with B8 keys. You just need to figure it out.

congrats

Explain how thumbsup

If you like my post and it helped you, press Thanks or Like
Quote this message in a reply
26-10-2016, 17:43 PM, (This post was last modified: 26-10-2016, 17:48 PM by nbkappa.)
Post: #15
ZTAudi  RE: Audi MMi 3G+ wrong update
(26-10-2016, 15:55 PM)lolli11 Wrote:  1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink

hello

thanks for sharing

even if the buttons around central knob are messed up, i can enter the GreenMenu and by swdl i can enable those 2 options in menu.

will give it a try to your idea. currently car has HN+ K0900 (A4 software, the correct one) (and not HN+R K0900), thats what System Information says. Will check also information from Greenmenu and post some pics.

few hours ago i tried to enable some options in RedMenu (update menu ) by manually selecting every option, but in most of the submenus BOOTLOADER option CANT be enabled.

i previously entered MU9498 menu, tried to enable ALL submodules, but as i can remember, 1st option (the Bootloader one) cant be enabled. So i was afraid to kill it and cancelled forced update.

even this b1tch will die i am (psychologically) prepared to have some fun recovering it from the dead. rofl

will have the car back in few hours

thanks

(26-10-2016, 17:20 PM)audia4 Wrote:  
(26-10-2016, 17:16 PM)lolli11 Wrote:  It is possible with B8 keys. You just need to figure it out.

congrats

Explain how thumbsup

MENU + CAR will get you there
Quote this message in a reply
26-10-2016, 17:52 PM,
Post: #16
RE: Audi MMi 3G+ wrong update
For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".
Quote this message in a reply
29-10-2016, 07:14 AM,
Post: #17
ZTAudi  RE: Audi MMi 3G+ wrong update
(26-10-2016, 17:52 PM)lolli11 Wrote:  For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".

hello

tried to update the MU9498 only but as i insert HN+ K0900 (Q5) firmware, and trying to update, software wont find MU9498 unit. it only finds MU9411.

some pics attached.

1. firmware i have now on car (or at least what car reports it has)

http://www.4shared.com/photo/yDziCE60ba/DSC_01.html

2. entered Greenmenu and check User Defined and then RedMenu for update

http://www.4shared.com/photo/Whzy9DoTce/DSC_02.html

3. reading SDCARD:

http://www.4shared.com/photo/oPXkThljce/DSC_03.html

4. version on SDCard is detected correctly as HN+

http://www.4shared.com/photo/kknHCQW0ce/DSC_04.html

5. reading meta

http://www.4shared.com/photo/o1-tQsD4ba/DSC_05.html

6. selecting User Defined option :

http://www.4shared.com/photo/lhK8LFhhba/DSC_06.html

7. and on Device Selection i dont have option MU9498 as i expected (and as on SDCard). it only shows MU9411.

http://www.4shared.com/photo/IUpijvkGce/DSC_07.html

Also back to PC, formatted SD, firmware again on SD then tried again on car. Same result, on UserDefined selection i only get MU9411.

8. here's the content of firmware from SDCard :

http://www.4shared.com/photo/dvKjDTkLba/HNcard.html

9. and here's meta from SDCard :

http://www.4shared.com/office/vlqE37Vlba/metainfo2.html

i dont know if it's against the rules posting meta, i gave link only for information purpose only.


whats wrong ?

thanks
Quote this message in a reply
30-10-2016, 18:41 PM,
Post: #18
RE: Audi MMi 3G+ wrong update
(29-10-2016, 07:14 AM)nbkappa Wrote:  
(26-10-2016, 17:52 PM)lolli11 Wrote:  For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".

hello

tried to update the MU9498 only but as i insert HN+ K0900 (Q5) firmware, and trying to update, software wont find MU9498 unit. it only finds MU9411.

some pics attached.

1. firmware i have now on car (or at least what car reports it has)

http://www.4shared.com/photo/yDziCE60ba/DSC_01.html

2. entered Greenmenu and check User Defined and then RedMenu for update

http://www.4shared.com/photo/Whzy9DoTce/DSC_02.html

3. reading SDCARD:

http://www.4shared.com/photo/oPXkThljce/DSC_03.html

4. version on SDCard is detected correctly as HN+

http://www.4shared.com/photo/kknHCQW0ce/DSC_04.html

5. reading meta

http://www.4shared.com/photo/o1-tQsD4ba/DSC_05.html

6. selecting User Defined option :

http://www.4shared.com/photo/lhK8LFhhba/DSC_06.html

7. and on Device Selection i dont have option MU9498 as i expected (and as on SDCard). it only shows MU9411.

http://www.4shared.com/photo/IUpijvkGce/DSC_07.html

Also back to PC, formatted SD, firmware again on SD then tried again on car. Same result, on UserDefined selection i only get MU9411.

8. here's the content of firmware from SDCard :

http://www.4shared.com/photo/dvKjDTkLba/HNcard.html

9. and here's meta from SDCard :

http://www.4shared.com/office/vlqE37Vlba/metainfo2.html

i dont know if it's against the rules posting meta, i gave link only for information purpose only.


whats wrong ?

thanks

Hi.
Only console can help you this time.
Visit this user's website
Quote this message in a reply
30-10-2016, 21:14 PM,
Post: #19
RE: Audi MMi 3G+ wrong update
(30-10-2016, 18:41 PM)trawqu Wrote:  Hi.
Only console can help you this time.

Hello

Please give more details.

1. Which console ? Martech ? Putty ?

2. Beside ordering components from ebay and making a cable for connection to MMi unit, where can i order one ready to run ?

3. Can it be written as jtag ? Or direct writing a ( dump ) *.bin file to a memory ?

4. in either case, where can i download software ? What format is firmware ?

If cannot write here all info, please link some threads where to get these details.

Thanks
Quote this message in a reply
01-11-2016, 09:05 AM,
Post: #20
RE: Audi MMi 3G+ wrong update
(30-10-2016, 21:14 PM)nbkappa Wrote:  
(30-10-2016, 18:41 PM)trawqu Wrote:  Hi.
Only console can help you this time.

Hello

Please give more details.

1. Which console ? Martech ? Putty ?

2. Beside ordering components from ebay and making a cable for connection to MMi unit, where can i order one ready to run ?

3. Can it be written as jtag ? Or direct writing a ( dump ) *.bin file to a memory ?

4. in either case, where can i download software ? What format is firmware ?

If cannot write here all info, please link some threads where to get these details.

Thanks

You must have cabel and working program Putty.
You must known what are you doing. It's very hard to explaine in one sentence.
Visit this user's website
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
HPorshe porsche pcm 2.1 map update + PL language Kamil.tokarz 0 50 Yesterday, 19:54 PM
Last Post: Kamil.tokarz
XZBMW BMW X3 F25 MOVE NAVI MAP UPDATE PROBLEM Kamil.tokarz 0 68 Yesterday, 11:56 AM
Last Post: Kamil.tokarz
ZTAudi Audi Map 2019 6.28.2 8R0060884GA darkdll 189 30,678 Yesterday, 05:53 AM
Last Post: jet_sex
XZBMW EVO map update & Fsc generator vincentnini2011 11 1,229 19-05-2019, 20:52 PM
Last Post: duckdonald
XZBMW mini move update problem.. please help me! margiovi 1 162 18-05-2019, 20:17 PM
Last Post: Florissilfhout
ZTAudi AUDI A8 MMI 2G BOSE SOUND issue AFTER Update coulinator 5 286 16-05-2019, 18:32 PM
Last Post: coulinator
  AUDI MMI 3G BASIC 2019 MAPS matik185 12 1,177 16-05-2019, 13:29 PM
Last Post: Baas J.
ZTAudi A3 8V sdcard map update gmc1103 0 116 14-05-2019, 10:36 AM
Last Post: gmc1103
  Solved ✔ RNS 510 how make update firmware? benzprod 6 216 13-05-2019, 08:16 AM
Last Post: benzprod
ZTAudi Audi traffic online request lukjod 3 384 12-05-2019, 13:36 PM
Last Post: marcwa19197

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content