Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Audi MMi 3G+ wrong update
26-10-2016, 15:55 PM,
Post: #11
RE: Audi MMi 3G+ wrong update
1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink
Quote this message in a reply
[+] 2 users say Thank You to lolli11 for this post
26-10-2016, 17:07 PM,
Post: #12
RE: Audi MMi 3G+ wrong update
(26-10-2016, 15:55 PM)lolli11 Wrote:  1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink

read
Read again post # 1

Big problem is that i CANNOT ENTER GreenMenu again (because i dont have CAR+MENU combination available) so i can mark again "Ignore region and variant" and then flash back good firmware.


Few questions:

1. How to enter GreenMenu again ? I have a friend with ODIS Program. Is there a way to mark "Ignore region and variant" by this or by

If you like my post and it helped you, press Thanks or Reputation
Quote this message in a reply
26-10-2016, 17:16 PM,
Post: #13
RE: Audi MMi 3G+ wrong update
It is possible with B8 keys. You just need to figure it out.
Quote this message in a reply
26-10-2016, 17:20 PM,
Post: #14
RE: Audi MMi 3G+ wrong update
(26-10-2016, 17:16 PM)lolli11 Wrote:  It is possible with B8 keys. You just need to figure it out.

congrats

Explain how thumbsup

If you like my post and it helped you, press Thanks or Reputation
Quote this message in a reply
26-10-2016, 17:43 PM, (This post was last modified: 26-10-2016, 17:48 PM by nbkappa.)
Post: #15
ZTAudi  RE: Audi MMi 3G+ wrong update
(26-10-2016, 15:55 PM)lolli11 Wrote:  1. Select "ignore region and variant"
2. Select "user defined mode"
3. Insert A4 Firmware
4. Manually select ALL submodules of "MU9498" -> MU9498 in the list will be shown with "Y"
5. Start update
6. Thank me later. wink

hello

thanks for sharing

even if the buttons around central knob are messed up, i can enter the GreenMenu and by swdl i can enable those 2 options in menu.

will give it a try to your idea. currently car has HN+ K0900 (A4 software, the correct one) (and not HN+R K0900), thats what System Information says. Will check also information from Greenmenu and post some pics.

few hours ago i tried to enable some options in RedMenu (update menu ) by manually selecting every option, but in most of the submenus BOOTLOADER option CANT be enabled.

i previously entered MU9498 menu, tried to enable ALL submodules, but as i can remember, 1st option (the Bootloader one) cant be enabled. So i was afraid to kill it and cancelled forced update.

even this b1tch will die i am (psychologically) prepared to have some fun recovering it from the dead. rofl

will have the car back in few hours

thanks

(26-10-2016, 17:20 PM)audia4 Wrote:  
(26-10-2016, 17:16 PM)lolli11 Wrote:  It is possible with B8 keys. You just need to figure it out.

congrats

Explain how thumbsup

MENU + CAR will get you there
Quote this message in a reply
26-10-2016, 17:52 PM,
Post: #16
RE: Audi MMi 3G+ wrong update
For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".
Quote this message in a reply
29-10-2016, 07:14 AM,
Post: #17
ZTAudi  RE: Audi MMi 3G+ wrong update
(26-10-2016, 17:52 PM)lolli11 Wrote:  For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".

hello

tried to update the MU9498 only but as i insert HN+ K0900 (Q5) firmware, and trying to update, software wont find MU9498 unit. it only finds MU9411.

some pics attached.

1. firmware i have now on car (or at least what car reports it has)

http://www.4shared.com/photo/yDziCE60ba/DSC_01.html

2. entered Greenmenu and check User Defined and then RedMenu for update

http://www.4shared.com/photo/Whzy9DoTce/DSC_02.html

3. reading SDCARD:

http://www.4shared.com/photo/oPXkThljce/DSC_03.html

4. version on SDCard is detected correctly as HN+

http://www.4shared.com/photo/kknHCQW0ce/DSC_04.html

5. reading meta

http://www.4shared.com/photo/o1-tQsD4ba/DSC_05.html

6. selecting User Defined option :

http://www.4shared.com/photo/lhK8LFhhba/DSC_06.html

7. and on Device Selection i dont have option MU9498 as i expected (and as on SDCard). it only shows MU9411.

http://www.4shared.com/photo/IUpijvkGce/DSC_07.html

Also back to PC, formatted SD, firmware again on SD then tried again on car. Same result, on UserDefined selection i only get MU9411.

8. here's the content of firmware from SDCard :

http://www.4shared.com/photo/dvKjDTkLba/HNcard.html

9. and here's meta from SDCard :

http://www.4shared.com/office/vlqE37Vlba/metainfo2.html

i dont know if it's against the rules posting meta, i gave link only for information purpose only.


whats wrong ?

thanks
Quote this message in a reply
30-10-2016, 18:41 PM,
Post: #18
RE: Audi MMi 3G+ wrong update
(29-10-2016, 07:14 AM)nbkappa Wrote:  
(26-10-2016, 17:52 PM)lolli11 Wrote:  For some modules there is no bootloader. It's fine. Just make sure MU9498 in the list is marked as "Y".

hello

tried to update the MU9498 only but as i insert HN+ K0900 (Q5) firmware, and trying to update, software wont find MU9498 unit. it only finds MU9411.

some pics attached.

1. firmware i have now on car (or at least what car reports it has)

http://www.4shared.com/photo/yDziCE60ba/DSC_01.html

2. entered Greenmenu and check User Defined and then RedMenu for update

http://www.4shared.com/photo/Whzy9DoTce/DSC_02.html

3. reading SDCARD:

http://www.4shared.com/photo/oPXkThljce/DSC_03.html

4. version on SDCard is detected correctly as HN+

http://www.4shared.com/photo/kknHCQW0ce/DSC_04.html

5. reading meta

http://www.4shared.com/photo/o1-tQsD4ba/DSC_05.html

6. selecting User Defined option :

http://www.4shared.com/photo/lhK8LFhhba/DSC_06.html

7. and on Device Selection i dont have option MU9498 as i expected (and as on SDCard). it only shows MU9411.

http://www.4shared.com/photo/IUpijvkGce/DSC_07.html

Also back to PC, formatted SD, firmware again on SD then tried again on car. Same result, on UserDefined selection i only get MU9411.

8. here's the content of firmware from SDCard :

http://www.4shared.com/photo/dvKjDTkLba/HNcard.html

9. and here's meta from SDCard :

http://www.4shared.com/office/vlqE37Vlba/metainfo2.html

i dont know if it's against the rules posting meta, i gave link only for information purpose only.


whats wrong ?

thanks

Hi.
Only console can help you this time.
Visit this user's website
Quote this message in a reply
30-10-2016, 21:14 PM,
Post: #19
RE: Audi MMi 3G+ wrong update
(30-10-2016, 18:41 PM)trawqu Wrote:  Hi.
Only console can help you this time.

Hello

Please give more details.

1. Which console ? Martech ? Putty ?

2. Beside ordering components from ebay and making a cable for connection to MMi unit, where can i order one ready to run ?

3. Can it be written as jtag ? Or direct writing a ( dump ) *.bin file to a memory ?

4. in either case, where can i download software ? What format is firmware ?

If cannot write here all info, please link some threads where to get these details.

Thanks
Quote this message in a reply
01-11-2016, 09:05 AM,
Post: #20
RE: Audi MMi 3G+ wrong update
(30-10-2016, 21:14 PM)nbkappa Wrote:  
(30-10-2016, 18:41 PM)trawqu Wrote:  Hi.
Only console can help you this time.

Hello

Please give more details.

1. Which console ? Martech ? Putty ?

2. Beside ordering components from ebay and making a cable for connection to MMi unit, where can i order one ready to run ?

3. Can it be written as jtag ? Or direct writing a ( dump ) *.bin file to a memory ?

4. in either case, where can i download software ? What format is firmware ?

If cannot write here all info, please link some threads where to get these details.

Thanks

You must have cabel and working program Putty.
You must known what are you doing. It's very hard to explaine in one sentence.
Visit this user's website
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
ZTAudi Audi MMI 3G Map 6.36.0 8R0051884KL 2023 atomantmk 33 10,781 8 hours ago
Last Post: B66B
XZBMW BDC Body Not seen after wrong coding naderlouis 8 124 Yesterday, 13:38 PM
Last Post: Node
ZTAudi 2012 Audi A1 MMI component security help sparky001 2 321 Yesterday, 05:14 AM
Last Post: sparky001
  E90 CIC SatNav Maps Update - Need some help BmwMerc 0 23 25-03-2024, 16:24 PM
Last Post: BmwMerc
ZTAudi Audi RMC Navigation Maps 2024 Europa atomantmk 4 534 17-03-2024, 20:28 PM
Last Post: Iceman87
ZTAudi Problem with Audi MMI3GP - no sound kafkaesk 5 175 16-03-2024, 19:51 PM
Last Post: PopDog
  MMI UPDATE HELP PLEASE Ecutech 1 91 13-03-2024, 23:10 PM
Last Post: skyrimzz
  Solved ✔ audi a6b7 mib2 firmware needed skyrimzz 3 121 13-03-2024, 12:03 PM
Last Post: skyrimzz
ZTAudi Audi MIB2 MHS2 2024 Navigation Maps daserds 6 579 03-03-2024, 22:00 PM
Last Post: m_fife
ZTAudi Audi MIB3 2024 Navigation Maps (+Porsche Lambo VW Touareg Bentley) daserds 4 375 02-03-2024, 11:35 AM
Last Post: cicoe

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content