[bmw335coding]

Hi guys,

i have a little problem.

I code the REM-Module for an F80 to make the rear view camera available at all speeds.

But the problem is the camera/pdc screen close automatically after 20 seconds.

Is there an value for this?

In the attachments you see the cafds from rem and hu_nbt.

[simonchs]

Hi guys,

i have a little problem.

I code the REM-Module for an F80 to make the rear view camera available at all speeds.

But the problem is the camera/pdc screen close automatically after 20 seconds.

Is there an value for this?

In the attachments you see the cafds from rem and hu_nbt.

There are V_SCHWELLE_2 (by vehicle speed) and D_SCHWELLE_2 (by distance).
It seems that you reach the running distance and the rear view camera close?
As I remember value "FF" of D_SCHWELLE_2 mean 255 meters and not unlimit it.

[bmw335coding]

Hi guys,

i have a little problem.

I code the REM-Module for an F80 to make the rear view camera available at all speeds.

But the problem is the camera/pdc screen close automatically after 20 seconds.

Is there an value for this?

In the attachments you see the cafds from rem and hu_nbt.

There are V_SCHWELLE_2 (by vehicle speed) and D_SCHWELLE_2 (by distance).
It seems that you reach the running distance and the rear view camera close?
As I remember value "FF" of D_SCHWELLE_2 mean 255 meters and not unlimit it.

Is there an value for no limited distance?

[milkyway]

Hello!

No! It's a 8 bit coding and the maximum is FF (255 km/h max.). As you know you can code with 8 bit only 0-255.

CU Oliver

[bmw335coding]

Hello!

No! It's a 8 bit coding and the maximum is FF (255 km/h max.). As you know you can code with 8 bit only 0-255.

CU Oliver

You write KM/H. My question was about the distance, but i think its 8 bit, too...