[mobilni]

Hello,
my bad luck with this Golf continue:
first scan was showing few errors, and one of them is:

Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 6Q0 909 605 A
Component: 14 AIRBAG VW5 02 0004
Coding: 12596
Shop #: WSC 00000
VCID: 356B10140F2398969D-4AEC
1 Fault Found:
00532 - Supply Voltage B+
07-10 - Signal too Low - Intermittent

After charging battery and fixing few more things on car,
I was trying to pool SKC from the car, and I get now this:

Address 15: Airbags Labels: 6Q0-909-605-VW5.lbl
Part No: 6Q0 909 605 A
Component: 14 AIRBAG VW5 02 0004
Coding: 12596
Shop #: WSC 00000
VCID: 356B10140F2398969D-4AEC
1 Fault Found:
65535 - Internal Control Module Memory Error

Dash Air Bag light was not ON before, but now is, and I
can't do anything about it, will come back in no time.
Using different cables and software I was able to get
Dash ECU reading, to add more keys, but car will not
accepted code from it, and now I have Air Bag light ON,
and code what I can't clean. My gut feeling is, that some
of the software or scanning make this happen!
Any suggestion how to solve this extra problem?
Any help will be greatly appreciated .

[tigre]

You have carprog?

[mobilni]

No, I don't, I have access to Ross Tech cable,
and VAG KKL cable with some Chinese software.
That is only tools what I have for now.
Regards.

[ROD-BENDERS]

Usually connectors under front seats need chopping out and wires resoldering together almost always fix airbag problem on vag

Sent from my SM-N910F using Tapatalk

[Ashraf6119]

Normally when you have 65535 - Internal Control Module Memory Error...........

Means you have internally software problem there for you need to replace the module...........But, have you tried to reset the battery.........? if not than try disconnecting the battery for few min and reconnect it try clearing the fault code...........

for this module part number there are many on eBay going cheap so it should not be a problem...........all you got to do is change the software coding and you should be fine.........

There have a look............

http://www.ebay.co.uk/sch/i.html?_from=R...A&_sacat=0

[mobilni]

Hello,
I try to disconnect battery, but no luck, also I checked
connection under seats, all is nice, clean, and good.
I am almost sure, that some of the scanning what I did,
trigger error in memory, so module is OK, but software
in my view, get somehow corrupted. Car was sitting,
and nobody was driving it. Will continue research,
and see can I re flash this module with clean image.
Thank you very much for help.

[tigre]

With carprog or srs reseter sometmes try clean crash data solve this

[mobilni]

With carprog or srs reseter sometmes try clean crash data solve this

I will try to find somebody who has that tools.
Thank you.

[CHIKODIAG]

HI THIS IS A CLEAR FILL FROM THE SAIME UNIT SIEMENS 5WK42867 VW5
IF YOU FOND CAR PROG OR SAME ONE HO CAN READ/WRIET YOUR UNIT USE THIS ONE.THE MEMORY IS HC08AZ32
GOOD LUCK

[mobilni]

Thank you very much,
that was very nice. I am in
the hunt for tool to try fix this
error.
Regards