[NeRkO20]

Did you copy the 4 files into the ediabas folder?

.:: Sent from Galaxy S6 Edge ::.

[kuer8800]

It can be placed in any directory operation

[NeRkO20]

Not really..I mean for example the cas4.prg file....and there are other 3 files which need to be placed into ediabas folder...the reader you can place anywhere, that's true

.:: Sent from Galaxy S6 Edge ::.

[STARSKY542]

Did you copy the 4 files into the ediabas folder?

.:: Sent from Galaxy S6 Edge ::.

4 files that I have that copy?

And in that directory folder EDIABAS, I have to copy.

I tried putting daten files, ecu, but not if they are correct.

Thanks for your reply

---

Not really..I mean for example the cas4.prg file....and there are other 3 files which need to be placed into ediabas folder...the reader you can place anywhere, that's true

.:: Sent from Galaxy S6 Edge ::.

I might indicate that three other files are needed?

Thanks for your reply

[NeRkO20]

These 4 files...need to be copied into ediabas/ecu

.:: Sent from Galaxy S6 Edge ::.

[STARSKY542]

These 4 files...need to be copied into ediabas/ecu

.:: Sent from Galaxy S6 Edge ::.

Thanks for your reply,

I have obtained the files from the folders, and I copied in the C: \ EDIABAS \ ecu but still does not work

I will upload some screenshots of the routes of the files to see if they are correct.











a greeting

[NeRkO20]

U need to reserve the ip from icom. For example wit itool radar

.:: Sent from Galaxy S6 Edge ::.

---

Why is your C:\ediabas\ecu empty? There are such more files....or did you not install ediabas 7.3?

.:: Sent from Galaxy S6 Edge ::.

[STARSKY542]

U need to reserve the ip from icom. For example wit itool radar

.:: Sent from Galaxy S6 Edge ::.

I itool Radar, but not if I'm using correctly.

As I use iTool Radar, to block ICOM?

---

Why is your C:\ediabas\ecu empty? There are such more files....or did you not install ediabas 7.3?

.:: Sent from Galaxy S6 Edge ::.

I do not know, but I've tried several installers and all have the C: ECU empty \ EDIABAS \.

What should be in it?

Can be not have installed the Standard Tools?

A greeting and thanks again for your instructions

[NeRkO20]

You need to block/reserve the ip of icom. You can do that via browser via the user interface from icom...or use a tool like itool radar

Standard tools could be the reason...I have installed a lot of software so I don't know


.:: Sent from Galaxy S6 Edge ::.

[guillaume.db]

Hi
I have tried to use SWID DE on F11 530xD (08/2013) with NBT without success.
SWID 1B works fine on my computer with my F20 M135i (05/2013) with Hu-Champ2

Error : System.Exception: SYS-0005: OBJECT FILE NOT FOUND

Could you help me ?
Thx