[thirdy]

I just got my d-can cable and tried my rheingold 3.39 native install. It is all working good.

What is the difference between the 3.39 and the 3.41? I am using the 3.39 right now on an '11 x5 diesel and so far everything is working ok. I had the 3.36 VMware install before and this native install is much faster and more stable.

[wdlbrmph]

wdlbrmph
can you share display setting 1024x600

Just use a tool like "DownScaling Switcher.exe" or a special driver.

[baikerr36]

Take NEX editor of the startup file and search, find an option and edit maintain and use. We made 1366 on the entire screen.

[kaizer_soze]

OK I tried info search for same model, VIN WJ00xxx , X series with:
a. Rheingold 3.41
b. Sensible's image of 180 GB ver 3.39 + 2.50.4
c. My old good ISIS full setup ver 2.7.190, 900 GB all images.

The extra information on old ISIS is chaotic on all kinds of documents...
Everything has a cost...

[Gatsby79]

I used mega download link, but not success under Vm... not work

[beemerboy88]

I used mega download link, but not success under Vm... not work

more info on what the problem is and what you have tried would be helpful.

[Gatsby79]

I solved now. wrong dll. sorry.
thanks

[NZ_M3]

I just tried my rheingold 3.39 on a 2003 325I with a cylinder 4 & 6 misfire. When I went through the test plan, on the stage where it shows "Procedure" it is blank. No document is showing. When I try to click "next" all I see is a "1 - yes" or a "2 - no". It's like it is not showing the documentation. Maybe I am missing some files that are not included in this software I download. If somebody can help me on this problem. Thanks

It is the same for me on Rheingold 3.39, 3.40 and 3.41

This version is incomplete, it is either not set up correctly or missing a lot of files - completely useless when you need to go further with diagnostics.

Only the initial scan works, when you need to troubleshoot nothing on it works.

Waste of time!!

[NZ_M3]

I did this to show that this system is incomplete and doesn't work like it should.

On ISTA-D 2.30 scanning the same car with one fault in CAS this is what you get:





then as you can see you can go in and diagnose the issue through a range of tests:








Tests complete (shown by green dot)



Now the same car same fault on Rheingold (3.39, 3.40, or 3.41 all the same results)




Then as you click "Display" to further diagnose the issue ... you get blank screens (or in version 3.41 the "Display" does not even light up)

[RvyKfvCt]

And what?
be notoriously that Reinhold is in testing
In parallel to the work of authorized dealers and Reingold and ISTA D

---

I think that in the German version will be a test plan if it provides for the error