Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. AutoHex II



Post Reply 
Bmw K-DCAN modification
08-12-2016, 21:46 PM (This post was last modified: 08-12-2016 21:49 PM by doktorabg.)
Post: #21
RE: Bmw K-DCAN modification
(08-12-2016 18:53 PM)ocostel Wrote:  
(08-12-2016 06:36 AM)snypertje Wrote:  
(07-12-2016 18:09 PM)doktorabg Wrote:  From 2010 BMW use pin 8 for Ethernet therefor you need switch between pin 7 and pin 8 like Catana said.
For E series use dcan utility but for F series is better to use Ethernet to OBD 16 pin (cable for E-SYS) with ISTA-D/P

2/2007 and older vehicles requires the pin 7 and 8 to be bridged!!

You must bridge or not 7 & 8 pins, like in picture attached

Up to 2010 the easy way is to bridge.
From 3.2007 use DCAN Utility.
From 2010 not use the bridge ,use only pin 7 because pin 8 is for Ethernet and therefore comes problem with communikation with car.
CAN L and H are still on pin 6,14 and therefore use DCAN utility to change the speed.
Find all posts by this user
Quote this message in a reply
12-12-2016, 20:17 PM
Post: #22
RE: Bmw K-DCAN modification
I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))
Find all posts by this user
Quote this message in a reply
 Thanks given by: snypertje
12-12-2016, 20:36 PM
Post: #23
XZBMW RE: Bmw K-DCAN modification
(12-12-2016 20:17 PM)Orsimi Wrote:  I have a fairly similar but different cable. I bought it 3 years ago and I only tried it with two E60 2004 and another E60 2005 and so far I have not had any problems. Do you have any idea if I have to make the modification for older models? (I leave the link of the seller to see if they know it: Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface))

Yep you need modification for older models.wink
Find all posts by this user
Quote this message in a reply
 Thanks given by: Orsimi
Post Reply 


Bookmarks

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
XZBMW BMW SSS Progman V32 VM Image for K+DCAN in doktorabg 4 2,361 27-03-2018 20:23 PM
Last Post: Bimmeristi
XZBMW KL15, KL30 not showing in ISTA+ using K+DCAN / Programming and ICOM questions in danc44 2 209 27-03-2018 17:27 PM
Last Post: snypertje
  BMW ISTA Online K+DCAN CABLE in Nyckos 4 490 18-03-2018 17:37 PM
Last Post: Nyckos
XZBMW DCAN wake-up? flash on desk in luce46M57 2 436 07-01-2018 20:54 PM
Last Post: inotherwords
  Any BMW wireless K+DCAN OBD plug? in bmwcoder75 7 819 13-12-2017 04:26 AM
Last Post: dazuc
  (Solved) ISTA+ 4.07 through K+DCAN cable on F series in willisodhiambo 8 1,350 31-10-2017 12:03 PM
Last Post: willisodhiambo
XSMini Strange problem with MINI R50 with K+Dcan cable in snypertje 13 921 21-04-2017 20:33 PM
Last Post: pdc
  (Solved)CCC update failed using K+dcan cable. in ninja_zx11 6 722 17-04-2017 16:55 PM
Last Post: ninja_zx11
  K-DCAN-Cable with ISTA 4 -> Problems while deleting error codes in Munich Simon 4 566 01-03-2017 21:44 PM
Last Post: Node
  Using k+dcan cable in vag's in avatarpr 0 273 01-03-2017 17:09 PM
Last Post: avatarpr

Forum Jump:


User(s) browsing this thread:
1 Guest(s)

Return to TopReturn to Content