Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
What replaced SAM for keyreader
19-09-2017, 15:07 PM,
Post: #51
|
|||
|
|||
RE: What replaced SAM for keyreader
Thanks!
Followed your directions and it works PERFECT! Thanks for the re-upload. Regards, JR |
|||
20-09-2017, 07:02 AM,
Post: #52
|
|||
|
|||
What replaced SAM for keyreader
I've gotten KeyReaderPlus to work using standalone ISPA hub and can get it to read keys however it never actually reads any relevant data from the key. It always just shows the same information on CBS, regardless of what car's key I read and says that the data is outdated (over 24 hours) even when I literally just used it with the car. Anyone else run into this issue?
Sent from my iPhone using Tapatalk Pro If this post helped you in anyway please use the thanks and/or REP buttons down here. Thanks!
|
|||
20-09-2017, 07:15 AM,
(This post was last modified: 20-09-2017, 07:27 AM by JR2.)
Post: #53
|
|||
|
|||
RE: What replaced SAM for keyreader
(20-09-2017, 07:02 AM)cryptocar Wrote: It always just shows the same information on CBS, regardless of what car's key I read and says that the data is outdated (over 24 hours) even when I literally just used it with the car. Anyone else run into this issue? Hi, One of two things are happening. The Keyreader interface program is not replacing\updating "keyreader.bin" and the same data is being used. Test this by deleting "keyreader.bin" and re-reading the key to verify it's proper operation Or the data in the car is not being updated and transferred to the key. For this fault see attached PDF. (29-04-2017, 13:06 PM)cryptocar Wrote: 81 31 0 444 787 F series will read? 787 does read ALL current keys There is a problem with a few keyreaders and BMW/Huf wrote a new dll to address this issue. Code: Replace the existing “KeyreaderDll.dll” file with a special modified version. |