Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
19-07-2018, 08:14 AM,
Post: #31
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(18-12-2017, 21:49 PM)pweber84 Wrote:  Guys, I have F10 10/2013 NBT display (CID) and NBT EVO from F22 11/2016.
All installed in the car but screen doesn't show anything. It doesn't even show NO SIGNAL, only black screen. Is it normal? I have voltage converter, so it has 8V now. Is coding require to show anything? I thought that NO SIGNAL will show anyway? Can anyone advice?

pweber84 I am in simular situation like you and I am wondering if you solve it?I have old display(CID) 2014 to code on new 2016 NBT EVO both from F15 chasis..No signal on board biggrin If anyone now how to code this to change apix value please let me no
19-07-2018, 10:15 AM,
Post: #32
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
If you read this topic from the begin you will find your answer....like literally its there...
19-07-2018, 11:12 AM, (This post was last modified: 19-07-2018, 13:45 PM by Clusters.)
Post: #33
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Ok. I will say once again

IF you have BLANK SCREEN issue - this means that your resolution or size is not set correctly.

If you have NO SIGNAL issue - this means apix1/2 or Comunication MMI/SPI is not set correctly OR SCREEN IS NOT SUPPORTED (like in case of id4 HU and id5 APIX2 screen)

If screen is off, not black/black, and you installed evo screen on NBT, than you should quite this hobby before you damage some thing. Evo screen will not work on NBT without Step UP converter, and only evo id4 screen will work than.

ALL TOUCH SCREENS are id5 and so APIX2, do do not ask if they will work on NBT or NBT EVO id4 (there was one case when evo id4 was able to work with apix2 screen until flashed to id5 SW, fucked up, but true)

Hope that clears all question or at least many. Contact me if need remote assistance, I’m barely ever on forums these days

Was it helpful? Greatenjoy,
please click click Respect ------under and ---------------------------------------------------------------------------------------------------- Thanks under
Reputation: +2 - rs@chip [+1] , ds2k [+1]
Visit this user's website
[+] 10 users say Thank You to yoodog for this post
20-07-2018, 00:49 AM, (This post was last modified: 20-07-2018, 00:51 AM by rs@chip.)
Post: #34
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(19-07-2018, 11:12 AM)yoodog Wrote:  Ok. I will say once again

IF you have BLANK SCREEN issue - this means that your resolution or size is not set correctly.

If you have NO SIGNAL issue - this means apix1/2 or Comunication MMI/SPI is not set correctly OR SCREEN IS NOT SUPPORTED (like in case of id4 HU and id5 APIX2 screen)

If screen is off, not black/black, and you installed evo screen on NBT, than you should quite this hobby before you damage some thing. Evo screen will not work on NBT without Step UP converter, and only evo id4 screen will work than.

ALL TOUCH SCREENS are id5 and so APIX2, do do not ask if they will work on NBT or NBT EVO id4 (there was one case when evo id4 was able to work with apix2 screen until flashed to id5 SW, fucked up, but true)

Hope that clears all question or at least many. Contact me if need remote assistance, I’m barely ever on forums these days

thanx mate for nice explane which I needed I am almost never deal with NBT.. thumbsup In my case 2017 (F15) CID was changed becouse psihical demage for older one before 2015..I think apix1,we couldnt find newer here and problem is we needed only CID every one sell all together..so now display showing NO SIGNAL its not dead..Is it posible to make this work by change coding parameters for apix,or iven doungrade NBT2-HU...etc?
[+] 1 user says Thank You to rs@chip for this post
12-11-2018, 11:41 AM,
Post: #35
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Id5 CID evo 8.8" (no touch screen) is apix1 or apix2 ?

handshake
12-11-2018, 23:01 PM,
Post: #36
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
My HU_NBT2 is in "bootloader" mode, so I no longer have access to the CAFD file.
My screen is in APIX1 but the HU_NBT2 is by default in APIX2.
Do you know how I can change the HU_NBT2 to switch to APIX1 and SPI protocol without coding the CAFD?
12-11-2018, 23:13 PM,
Post: #37
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(12-11-2018, 23:01 PM)hugo325 Wrote:  My HU_NBT2 is in "bootloader" mode, so I no longer have access to the CAFD file.
My screen is in APIX1 but the HU_NBT2 is by default in APIX2.
Do you know how I can change the HU_NBT2 to switch to APIX1 and SPI protocol without coding the CAFD?

Also you will need to step down the voltage from 12v to 8.2v
13-11-2018, 07:55 AM,
Post: #38
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Ok, so I just need to reduce the supply voltage for it to work? No need to change the protocol etc?
13-11-2018, 10:28 AM,
Post: #39
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
You can confirm to me that I just need to cut the 2 power wires of the cable.
I add a voltage converter 12V to 8.2V. I reconnect the wires.
And it must work?
This is just a problem of tension? No problem with the protocol?
13-11-2018, 10:59 AM,
Post: #40
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Please read post #15. You need to make some changes related to coding and reduce the voltage to make it work.


Possibly Related Threads…
Thread Author Replies Views Last Post
  Making F-series combox work in e-series Ryn079 0 109 23-03-2024, 19:44 PM
Last Post: Ryn079
  APIX1 screen with touch ? oros 1 161 25-02-2024, 19:03 PM
Last Post: zero9
XZBMW Entrynav2 - GPS doesn't work - no location Semi14 4 435 24-01-2024, 16:31 PM
Last Post: Semi14
XZBMW G12 touch screen in F10 apix1 enclosure ? RomeyRome 8 1,090 19-01-2024, 19:19 PM
Last Post: Mwahab
  Set up tool 32 to work with F-Series car Haug530d 7 988 02-09-2023, 19:12 PM
Last Post: Haug530d
XZBMW Steering Retrofiting on BMW E64 To make work heating Fraizer 0 185 04-08-2023, 13:17 PM
Last Post: Fraizer
XZBMW F10 PRE LCI M5 Wheel and M1 , M2 Button how to work budddyyy 7 447 14-07-2023, 06:55 AM
Last Post: budddyyy
  FA (F, G) generator with bimmer.work laquangksxd 4 1,330 07-07-2023, 15:08 PM
Last Post: dncomputech
XZBMW BMW E81. Change FRM. Power windows work in jerks TIGHTFIN 6 516 23-06-2023, 09:07 AM
Last Post: Maygur
XSMini ista dont work on G212023 Bluposeidon 1 263 22-05-2023, 21:17 PM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content