Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
13-11-2018, 14:08 PM,
Post: #41
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Yes I know this wink But a can't code my HU_NBT2, it's in bootlaoder mode, so I can't modify the CAFD file.

So my question is : if I just just reduce the voltage it works ?
15-01-2019, 17:53 PM, (This post was last modified: 15-01-2019, 17:59 PM by yoodog.)
Post: #42
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(13-11-2018, 14:08 PM)hugo325 Wrote:  Yes I know this wink But a can't code my HU_NBT2, it's in bootlaoder mode, so I can't modify the CAFD file.

So my question is : if I just just reduce the voltage it works ?

voltage has nothing to do with it, no it doesn't. NBT screen can work with 12v as well for some time just fine, issue is that evo g series has APIX2 and SPI in its BTLD service mode - because it is expected to show that info on hem screen. 

hope that answers your questions

(12-11-2018, 23:01 PM)hugo325 Wrote:  My HU_NBT2 is in "bootloader" mode, so I no longer have access to the CAFD file.
My screen is in APIX1 but the HU_NBT2 is by default in APIX2.
Do you know how I can change the HU_NBT2 to switch to APIX1 and SPI protocol without coding the CAFD?

man.... Tell me, why do you need to see your evo if it is not working..... Flash it - no need for screen, than code it for any screen you want... don't be ridiculous

(12-11-2018, 11:41 AM)rickynguyen Wrote:  Id5 CID evo 8.8" (no touch screen) is apix1 or apix2 ?

screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, yes NBT screen can work on any evo with some coding on side of Evo. 

(20-07-2018, 00:49 AM)rs@chip Wrote:  
(19-07-2018, 11:12 AM)yoodog Wrote:  Ok. I will say once again

IF you have  BLANK SCREEN issue - this means that your resolution or size is not set correctly.

If you have  NO SIGNAL issue - this means apix1/2 or Comunication MMI/SPI is not set correctly OR SCREEN IS NOT SUPPORTED (like in case of id4 HU and id5 APIX2 screen) 


If screen is off, not black/black, and you installed evo screen on NBT, than you should quite this hobby before you damage some thing. Evo screen will not work on NBT without Step UP converter, and only evo id4 screen will work than.

ALL TOUCH SCREENS are id5 and so APIX2, do do not ask if they will work on NBT or NBT EVO id4 (there was one case when evo id4 was able to work with apix2 screen until flashed to id5 SW, fucked up, but true)

Hope that clears all question or at least many. Contact me  if need remote assistance, I’m barely ever on forums these days

thanx mate for nice explane which I needed I am almost never deal with NBT.. thumbsup In my case 2017 (F15) CID was changed becouse psihical demage for older one before 2015..I think apix1,we couldnt find newer here and problem is we needed only CID every one sell all together..so now display showing NO SIGNAL its not dead..Is it posible to make this work by change coding parameters for apix,or iven doungrade NBT2-HU...etc?

Was it helpful? Greatenjoy,
please click click Respect ------under and ---------------------------------------------------------------------------------------------------- Thanks under
Visit this user's website
[+] 2 users say Thank You to yoodog for this post
15-01-2019, 19:45 PM,
Post: #43
XZBMW  RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
Is this also native ID5 unit, it comes from MINI and is HB B246, HW 2.3

   
04-05-2019, 23:06 PM,
Post: #44
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(15-01-2019, 17:53 PM)yoodog Wrote:  screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!


Attached Files Thumbnail(s)
   
05-05-2019, 14:35 PM,
Post: #45
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(04-05-2019, 23:06 PM)Lux Wrote:  
(15-01-2019, 17:53 PM)yoodog Wrote:  screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Was it helpful? Greatenjoy,
please click click Respect ------under and ---------------------------------------------------------------------------------------------------- Thanks under
Reputation: +1 - Lux [+1]
Visit this user's website
[+] 1 user says Thank You to yoodog for this post
13-05-2019, 08:26 AM,
Post: #46
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
the problem fixed or not yet?
13-05-2019, 15:09 PM,
Post: #47
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(13-05-2019, 08:26 AM)rana Wrote:  the problem fixed or not yet?

? what is the issue? It works. Code correct parameters for your screen and it will work. PM me TV access if need help

Was it helpful? Greatenjoy,
please click click Respect ------under and ---------------------------------------------------------------------------------------------------- Thanks under
Visit this user's website
08-08-2019, 17:44 PM,
Post: #48
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(05-05-2019, 14:35 PM)yoodog Wrote:  
(04-05-2019, 23:06 PM)Lux Wrote:  
(15-01-2019, 17:53 PM)yoodog Wrote:  screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information
Reputation: +1 - Lux [+1]
[+] 1 user says Thank You to DayvG for this post
08-08-2019, 17:59 PM,
Post: #49
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases
1. case was changed and actual unit inside is HW 2.3 or older and def HB1xx
2. you are not reading RAM in correct place, please show me your work


(08-08-2019, 17:44 PM)DayvG Wrote:  
(05-05-2019, 14:35 PM)yoodog Wrote:  
(04-05-2019, 23:06 PM)Lux Wrote:  
(15-01-2019, 17:53 PM)yoodog Wrote:  screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

Was it helpful? Greatenjoy,
please click click Respect ------under and ---------------------------------------------------------------------------------------------------- Thanks under
Visit this user's website
[+] 1 user says Thank You to yoodog for this post
08-08-2019, 18:03 PM, (This post was last modified: 08-08-2019, 18:32 PM by DayvG.)
Post: #50
RE: Any way to get EVO with APIX2 from G to work with old APIX1 nbt cid?
(08-08-2019, 17:59 PM)yoodog Wrote:  HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases
1. case was changed and actual unit inside is HW 2.3 or older and def HB1xx
2. you are not reading RAM in correct place, please show me your work


(08-08-2019, 17:44 PM)DayvG Wrote:  
(05-05-2019, 14:35 PM)yoodog Wrote:  
(04-05-2019, 23:06 PM)Lux Wrote:  
(15-01-2019, 17:53 PM)yoodog Wrote:  screens HB2xx units from factory all apix2 (all HB2xx units are id5/6)

Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

I read the HU using featureinstaller and also femtoevo. Both say 2GB. Unit is currently being flashed to ID5/6  but I will post an image on completion. But it definitely says B246 and HW 3.1

(08-08-2019, 18:03 PM)DayvG Wrote:  
(08-08-2019, 17:59 PM)yoodog Wrote:  HW3.1 all 4gb and all HB2xx are 4gb - you have one of two cases
1. case was changed and actual unit inside is HW 2.3 or older and def HB1xx
2. you are not reading RAM in correct place, please show me your work


(08-08-2019, 17:44 PM)DayvG Wrote:  
(05-05-2019, 14:35 PM)yoodog Wrote:  
(04-05-2019, 23:06 PM)Lux Wrote:  Hi, I have a doubt... sad

Can you tell me if this unit is an ID5 unit? 

It comes from a Mini F56 (May 2017), the code is HB B246 and the hw is 3.1

Thanks!!

Hi yes it is id5/6 capable unit - mini system is a  different but you are correct - can be flashed to be used on bmw as id6 with any screen incl touch screen (it originally comes with mini 8.8 touch screen, have one if needed )

Hi, I have one of these units B246 HW3.1 but it only shows with 2GB of RAM? Does this affect the ID5/6 operation? Is itclikely to experience reboots? I’m just planning the install now.

I read the HU using featureinstaller and also femtoevo. Both say 2GB. Unit is currently being flashed to ID5/6  but I will post an image on completion. But it definitely says B246 and HW 3.1

So based on the serial number here is it likely that the internals have been swapped on this unit or am I missing something?


Attached Files Thumbnail(s)
       

I don't know much, but if I've helped you're welcome.
MGU Virgin/Component Protection Removal/Full Retrofit FSC
clapping BMW ISPI Admin Client License (Contact for info)
cheers Complete EntryNav2 FSC solution for Retrofit/Component Protection
enjoyKAFAS2 7E/BE/BF KAFAS4 11F/13E/13F
biggrin Carplay activations/FullScreen/ID4-5
rock EntryNav2 Carplay activations OEM/Provisioning
mail Contact me for more information


Possibly Related Threads…
Thread Author Replies Views Last Post
  Making F-series combox work in e-series Ryn079 1 119 1 hour ago
Last Post: Marx
  APIX1 screen with touch ? oros 1 161 25-02-2024, 19:03 PM
Last Post: zero9
XZBMW Entrynav2 - GPS doesn't work - no location Semi14 4 435 24-01-2024, 16:31 PM
Last Post: Semi14
XZBMW G12 touch screen in F10 apix1 enclosure ? RomeyRome 8 1,090 19-01-2024, 19:19 PM
Last Post: Mwahab
  Set up tool 32 to work with F-Series car Haug530d 7 988 02-09-2023, 19:12 PM
Last Post: Haug530d
XZBMW Steering Retrofiting on BMW E64 To make work heating Fraizer 0 185 04-08-2023, 13:17 PM
Last Post: Fraizer
XZBMW F10 PRE LCI M5 Wheel and M1 , M2 Button how to work budddyyy 7 447 14-07-2023, 06:55 AM
Last Post: budddyyy
  FA (F, G) generator with bimmer.work laquangksxd 4 1,330 07-07-2023, 15:08 PM
Last Post: dncomputech
XZBMW BMW E81. Change FRM. Power windows work in jerks TIGHTFIN 6 516 23-06-2023, 09:07 AM
Last Post: Maygur
XSMini ista dont work on G212023 Bluposeidon 1 263 22-05-2023, 21:17 PM
Last Post: 2013m5

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content