Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Solved ✔ KESS Error: Warning: The tool has not been updated.
20-12-2016, 02:31 AM, (This post was last modified: 21-12-2016, 22:13 PM by Clusters.)
Post: #1
KESS Error: Warning: The tool has not been updated.
Hello all,

I have a china clone kess fw4.036 for which I have re loaded tokens I think 2 or 3 times, everything ok. But now I have tried to load again when it was showing the advice in italian "update on next use is mandatory" when software was opened, or something like that, only 1 token remained.. And when I try to re load nothing happens, always the same.. So I decided to use the last token and give antoher try, so I did.. and now when I want to load token, when it opens the software I get the error error: "Warning: The tool has not been updated. Connect the tool to internet and open the software again" And software closes (ksuite) and cannot open, when I try to open ksuite I get always the same error, in differente computers with different ksuite versions the same error. Only help I found in the internet is to change usb cable which obviously didn't work.

Anyone had this issue or knows how to solve it?

Thanks!
Quote this message in a reply
20-12-2016, 08:24 AM,
Post: #2
RE: KESS Error: Warning: The tool has not been updated.
Install a new clean drive . and perform the same manipulations to reset token
Quote this message in a reply
[+] 2 users say Thank You to vyugovp for this post
20-12-2016, 08:39 AM,
Post: #3
RE: KESS Error: Warning: The tool has not been updated.
Happen to me, my problem as the SDcard inside Kess,,,get new sd card and copy the files to there....start k-suite and update....
Quote this message in a reply
[+] 2 users say Thank You to NFSR for this post
20-12-2016, 23:18 PM,
Post: #4
RE: KESS Error: Warning: The tool has not been updated.
Hello, I have the same problem happened to me. you have to take a new sd 4 gb, do an update to the instrument, then there is a problem with the software to activate the token. you should download a new software from the web, and together there is a video guide, both for the drivers and for the token and ksuite. do the procedure and everything is ok.
Quote this message in a reply
[+] 2 users say Thank You to Mansellvins90 for this post
21-12-2016, 22:08 PM,
Post: #5
RE: KESS Error: Warning: The tool has not been updated.
Thank you guys.. finally solved it by replacing sd card for a 4gb one and performing token reset procedure... but as I did not want to let the 4gb there, I did again the same process with original sd card, and it worked.. so I don't know what information does kess see in the SD card which makes it think that it has not been updated or domething..
thanks! this post can be closed.
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Ecu Bench Tool 2.1.5.6 (AMT BST Clone) what do you think ? ROD-BENDERS 127 17,154 Yesterday, 02:10 AM
Last Post: weinerbarn
LMazda Mazda CX-7 need ecu eep Adblue error removed joshturk 3 99 21-03-2024, 20:57 PM
Last Post: joshturk
ZTAudi A3 1.8tfsi Flaps Error Delete jenny123 3 133 19-03-2024, 13:44 PM
Last Post: Jurebv
LFord Help error Ford Mondeo V 20tdci Delphi DCM61 bmw320d 2 78 18-03-2024, 18:42 PM
Last Post: bmw320d
XZBMW Mev946 320i 150HP Orginal full ecu file for kess Mathijshee 6 416 03-03-2024, 00:48 AM
Last Post: Mathijshee
  Kess vr file jtdpow 1 118 29-02-2024, 17:29 PM
Last Post: loki954
ZVW Flashing Tool and Software Development hybridr 3 325 29-02-2024, 13:07 PM
Last Post: nirvananils
  read sid310 pcm tool clone help manueldord 5 275 12-02-2024, 21:31 PM
Last Post: manueldord
  Sim2k-510 reading and writing tool joseph alison 11 5,656 09-02-2024, 19:49 PM
Last Post: Alameer
  Need Kess original Virtual Read file vw SHARAN 2.0tdi EDC17c46 vision 1 130 31-01-2024, 22:51 PM
Last Post: Stig33

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content