Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Corsa c 1.2 2005 id40 keychip programming problems
24-12-2016, 21:48 PM,
(This post was last modified: 24-12-2016, 21:49 PM by dil6222.)
Post: #1
|
|||
|
|||
Corsa c 1.2 2005 id40 keychip programming problems
Hello all am having problems programming keychip for
Corsa c 2005 z12xep immobiliser box is UN variant its says it programmed successfully and shows up in opcom measuring blocks as programmed key and shows as transp 1 but always shows as invalid for status. I have tried with 1.59 1.39 firmware on opcom with various software but no luck also tryed zed clone to precode first but makes no difference any ideas. Cheers If mine or others posts and info are helpful please give thanks/rep
|
|||
24-12-2016, 22:16 PM,
Post: #2
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
Is that new(spare) key you want to programm ? which transponder type you used for that? In measuring blocks in immo you found transponder status invalid,but is it also marked as "unknown key" ?
|
|||
24-12-2016, 22:44 PM,
Post: #3
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
(24-12-2016, 22:16 PM)djole3113 Wrote: Is that new(spare) key you want to programm ? which transponder type you used for that? In measuring blocks in immo you found transponder status invalid,but is it also marked as "unknown key" ?hello thanks for helping and it's fresh reset immobiliser with no keys and I'm using pcf7935 id40 So just need to program new one and ones that I've tried programming are recognised In Key block as valid key but yes immobiliser status shows invalid. If mine or others posts and info are helpful please give thanks/rep
|
|||
24-12-2016, 23:15 PM,
Post: #4
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
I think that you need to match new immobiliser untit with engine control modlue first,and than to programm new keys. If I understood well,you changed immo unit.
|
|||
24-12-2016, 23:31 PM,
Post: #5
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
(24-12-2016, 23:15 PM)djole3113 Wrote: I think that you need to match new immobiliser untit with engine control modlue first,and than to programm new keys. If I understood well,you changed immo unit.I had reset unit when trying to solve a previous problem and wiped all keys what is the method to match? programming for immo then new immobiliser installed Then key should program? If mine or others posts and info are helpful please give thanks/rep
|
|||
24-12-2016, 23:41 PM,
Post: #6
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
Not completely clear what you have done with car before,but if you reset immo it comes in factory(virgin)state and has to be matched with car. The best is to see opcom immobiliser guide,you will find the solution.
|
|||
24-12-2016, 23:47 PM,
(This post was last modified: 24-12-2016, 23:50 PM by dil6222.)
Post: #7
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
(24-12-2016, 23:41 PM)djole3113 Wrote: Not completely clear what you have done with car before,but if you reset immo it comes in factory(virgin)state and has to be matched with car. The best is to see opcom immobiliser guide,you will find the solution. Everything lol Yeah think it needs matching will be few days before I can test but I will let you know results post immo guide for me here if ya can Also any ideas if the 2 letters on keychip after pcf7935 as so makes any difference to anything? If mine or others posts and info are helpful please give thanks/rep
|
|||
24-12-2016, 23:52 PM,
Post: #8
|
|||
|
|||
RE: Corsa c 1.2 2005 id40 keychip programming problems
You need to match immobiliser first,because if perform reseting,than you have to perform matching before key programming. You will find everything inside this manual.
|