Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F10 - initializing used TMS module in HEADLIGHT
05-09-2019, 07:06 AM,
Post: #31
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Still an instruction for this needed, also from me.
So, I need to install used TMS for 2010 F10 adaptive xenons. How to "reset" used module in headlight? What exactly should I put in Tool32? |
|||
05-09-2019, 08:17 AM,
Post: #32
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Have you tried using E-sys first: Detect CAF for ECU, then VO Code the module (writes car VIN to used TMS)
After that: use ISTA+ to initialise Please report back |
|||
05-09-2019, 08:34 AM,
Post: #33
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
(05-09-2019, 08:17 AM)Florissilfhout Wrote: Have you tried using E-sys first: Detect CAF for ECU, then VO Code the module (writes car VIN to used TMS) Hi on F10 2010 model TMS modules are not listed in ESYS for coding they are controlled by FRM, i this case if you code in same way FRM there is no success ista d complains again about used tms and asks new ones ordered from bmw (this is reality tested on F10 and F07). regards. |
|||
05-09-2019, 09:33 AM,
Post: #34
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
(05-09-2019, 08:34 AM)edtech Wrote: Hi on F10 2010 model TMS modules are not listed in ESYS for coding they are controlled by FRM, i this case if you code in same way FRM there is no success ista d complains again about used tms and asks new ones ordered from bmw (this is reality tested on F10 and F07) Exactly and still waiting the answer: what to put in Tool32 as ID for TMS modules? Edit: We are still in discussion about Bi-Xenon headlight mosules, NOT LED modules, whose are totally different story. |
|||
05-09-2019, 11:21 AM,
Post: #35
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
For tms3_l or _r in tool32 try this:
jobs: steuern_routine Argument: ARG;LED_EINLERNVORGANG;STR than, Argument: ARG;LED_EINLERNVORGANG;STPR than, Argument: ARG;LED_EINLERNVORGANG;RRR instead of argument use ID ID;0xA536;STR ID;0xA536;STPR ID;0xA536;RRR Vojnó
Press Thanks and reputation if this post helped you. |
|||
05-09-2019, 11:43 AM,
Post: #36
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Thank's and great, but:
What are the strings asked by command in detail? |
|||
05-09-2019, 12:33 PM,
Post: #37
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
1. cafd find, by e-sys detect caf swe.
2. drive module intializing by ista - search for drive module.... |
|||
05-09-2019, 13:02 PM,
Post: #38
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
So once again:
I chose steuern_routine But what I axcatly put as an argument. tred those You mentioned, but Tool refuses those: wrong argument at least for EINLERNWO... I hope nobody would not anymore put any stupid esys instructions here. This is completely different story! EDIT: Ok, maybe I found the error. I try this with E90 FRM3 (it is currently in my bench). Probable it does not know any led things at all... |
|||
25-10-2019, 16:51 PM,
Post: #39
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
I am trying to use e-says and need your help. Can you help me please ?
I have changed module ( module was water damaged and angle eye stoped working )on my left headlight and now adaptive light error showing on dash. Module is replaced now. I have no idea how to write vn in module ? I got software and cable. Please advice. (25-03-2019, 12:50 PM)maxiart Wrote: Can you tell me via e-sys the right way? |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content