Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
BMW F10 - initializing used TMS module in HEADLIGHT
29-12-2016, 17:47 PM,
(This post was last modified: 29-12-2016, 19:43 PM by number7.)
Post: #1
|
|||
|
|||
BMW F10 - initializing used TMS module in HEADLIGHT
I bought used module. Headlight with LED rings and XENON. XENON works OK, but LED need to be initialized. But when I try initialize it by ISTA-D it says that I need new one, not used module to initialize it.
I have already tried to program it by ISTA-P. After programming FEM (or FRM) LED works but after ignition off and back on LED isn't working. BMW F10 from 2013 lift. Any idea? |
|||
29-12-2016, 19:43 PM,
Post: #2
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Did you check TMS part nr?
Setubal-Portugal
|
|||
30-12-2016, 06:49 AM,
Post: #3
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Yes - it's the same
|
|||
02-01-2017, 21:00 PM,
Post: #4
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Check if caf present (with esys), if not, generate then code module, after this try to initialize again
|
|||
03-01-2017, 09:21 AM,
(This post was last modified: 03-01-2017, 09:21 AM by number7.)
Post: #5
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
Ok - but how ? I know how to use E-SYS but I have no idea what are You talking about...
|
|||
03-01-2017, 10:29 AM,
Post: #6
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
To change tms id in frm do fdl code:
check_tms_id_off to activ then try initializing by Rheingold or ISTA/D Setubal-Portugal
|
|||
03-01-2017, 12:45 PM,
Post: #7
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
|
|||
03-01-2017, 17:18 PM,
(This post was last modified: 03-01-2017, 17:18 PM by Deimis.)
Post: #8
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
I am in vocation, next week I will check my car. Did you try to edit? What options do you have when press edit on F01 LCI BIX/ECE ?
Setubal-Portugal
|
|||
04-01-2017, 10:09 AM,
Post: #9
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
|
|||
06-01-2017, 09:14 AM,
Post: #10
|
|||
|
|||
RE: BMW F10 - initializing used TMS module in HEADLIGHT
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Return to TopReturn to Content